Brief introduction of 119-39-1

The synthetic route of 119-39-1 has been constantly updated, and we look forward to future research findings.

119-39-1, Phthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Method A A mixture of 4-bromophthalazin-1(2H)-one (3) (2.22mmol), potassium carbonate (6.66mmol) in dry acetone (20mL) was heated to boiling for 30 min and next methyl iodide (3.33mmol) was added. The reaction mixture was heated and stirred under reflux for 8h. Method B A mixture phthalazin-1(2H)-one (2) (3.42mmol), caesium carbonate (4.11 mmol) in dry acetone (20 mL) was charged to PTFE tubes, sealed in ceramic cases and placed in the rotor. The reaction mixture was heated to 55C, held for 0.5 h at 55C and then cooled to 25C. In the next step the methyl iodide (0.23mL, 3.77mmol) was added and the reaction was continued at 55C for 3.5h. After cooling to room temperature the separated solid was collected by filtration and washed with acetone (5mL). The filtrate was concentrated under reduced pressure and then the crude product was purified by flash chromatography., 119-39-1

The synthetic route of 119-39-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Malinowski, Zbigniew; Fornal, Emilia; Sieroci?ska, Beata; Czeczko, Renata; Nowak, Monika; Tetrahedron; vol. 72; 49; (2016); p. 7942 – 7951;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Application of 5,5-Dimethylimidazolidine-2,4-dione

As the rapid development of chemical substances, we look forward to future research findings about 119-39-1

The phthalazine compound, cas is 119-39-1 name is Phthalazin-1(2H)-one, mainly used in chemical industry, its synthesis route is as follows.,119-39-1

2H-phthalazin-1-one (150 mmol), (3,4-dihydroisoquinolin-2(1H)-carboxylic acid tert-butyl ester-5-yl)-carbamic acid o-chlorophenyl ester (195 mmol) were placed in a reaction flask, then DMF100 ml was added and the reaction was carried out at 55 C overnight. The reaction was stopped, added 300 ml of ethyl acetate, 200ml of dichloromethane, and extracted. The organic phase was separated, and the aqueous phase was extracted with dichloromethane (3*50 ml). The organic phase was combined, dried over anhydrous sodium sulfate, and Purification by column chromatography gave the title compound.

As the rapid development of chemical substances, we look forward to future research findings about 119-39-1

Reference£º
Patent; Nanjing Advanced Biological Materials And Process Equipment Institute Co., Ltd.; Guo Chengjie; (16 pag.)CN109336863; (2019); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Extracurricular laboratory: Synthetic route of 119-39-1

As the rapid development of chemical substances, we look forward to future research findings about 119-39-1

Phthalazin-1(2H)-one, cas is 119-39-1, it is a common heterocyclic compound, the phthalazine compound, its synthesis route is as follows.,119-39-1

A. Novel Preparation of 1-Chlorophthalazine. One mole equivalent (250 g) of 1(2H)-phthalazinone and 3.8 mole equivalents (775 g) of phosphorus oxychloride were charged into a 3-L, 3-necked flask fitted with a temperature probe and condenser. The slurry was stirred and heated to 80 C., maintained at that temperature for 30 minutes, and then the heat source was removed. Thin layer chromatographic analysis indicated that conversion to 1-chlorophthalazine was complete. The mixture was allowed to cool to room temperature, and 1.6 L of hexanes was added. The resulting slurry was stirred for several minutes, and the hexane layer was decanted. Addition of hexanes and decantation was repeated two more times. Then 1.6 L of tetrahydrofuran was added; as the solution was stirred, an off-white precipitate formed. The solid was isolated by filtration and washed with 250 mL of cold tetrahydrofuran to afford an 85-100% yield of 1-chlorophthalazin, the desired product, as an off-white powder that could be dried and characterized.

As the rapid development of chemical substances, we look forward to future research findings about 119-39-1

Reference£º
Patent; Nelson, Deanna J.; US2005/137397; (2005); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Application of [1,1′-Binaphthalene]-2,2′-diol

As the rapid development of chemical substances, we look forward to future research findings about 253-52-1

The phthalazine compound, name is Phthalazine,cas is 253-52-1, mainly used in chemical industry, its synthesis route is as follows.,253-52-1

General procedure: Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol.

As the rapid development of chemical substances, we look forward to future research findings about 253-52-1

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Downstream synthetic route of 253-52-1

As the paragraph descriping shows that 253-52-1 is playing an increasingly important role.

253-52-1, Phthalazine is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a stirred solution of furan (1.20 g,17.6 mmol) in dry THF (20 mL) was added dropwise n-butyllithium (2.5 M in hexanes, 7.30 mL,18.3 mmol) over a period of 30 min at ?78 ¡ãC. The solution was warmed to ?25 ¡ãC, and stirring wascontinued at this temperature for 30 min. The reaction mixture was cooled back to ?78 ¡ãC, and asolution of 1 (2.00 g, 15.3 mmol) in dry THF (20 mL) was added dropwise over 30 min. The reaction mixture was stirred at this temperature for 2 h. The mixture was poured into saturated NH4Cl(100 mL) and extracted with ethyl acetate (3 ¡Á 50 mL). The combined organic extracts were thenwashed with saturated NaCl (50 mL), dried (MgSO4), filtered, and concentrated under vacuum toafford 3f as a light brown oil. The crude product 3f was dissolved in DCM (30 mL), and triethylamine(2.37 g, 3.26 mL, 23.4 mmol) was added, followed by dropwise addition of acryloyl chloride (1.59 g,1.43 mL, 17.6 mmol) at 0 ¡ãC. The reaction mixture was stirred at 0 ¡ãC for 2 h. The reaction was thenquenched with saturated NaCl (25 mL), and the organic layer was separated. The aqueous layer wasextracted with DCM (2 ¡Á 30 mL), and the combined organic extracts were washed with saturated NaCl(50 mL), dried (MgSO4), filtered, and concentrated to afford the crude product. The product waspurified on a silica gel column eluted with hexanes?EtOAc (7:3) to afford 4f (2.66 g, 60percent) as a yellowliquid., 253-52-1

As the paragraph descriping shows that 253-52-1 is playing an increasingly important role.

Reference£º
Article; Nammalwar, Baskar; Muddala, N.Prasad; Bourne, Christina R.; Henry, Mary; Bourne, Philip C.; Bunce, Richard A.; Barrow, Esther W.; Berlin, K.Darrell; Barrow, William W.; Molecules; vol. 19; 3; (2014); p. 3231 – 3246;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Application of 7-Chloro-1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-1,8-naphthyridine-3-carboxylic Acid

As the rapid development of chemical substances, we look forward to future research findings about 119-39-1

The phthalazine compound, cas is 119-39-1 name is Phthalazin-1(2H)-one, mainly used in chemical industry, its synthesis route is as follows.,119-39-1

[0322] General procedure: To a mixture ofphthalazone in anhydrous DMF (270mL), NaOEt (21% w/w solution in EtOH, 51 mL, 137 mmol) was added. After 15 min,propargyl bromide (80% solution in toluene, 14.8 mL, 20.4 g, 137 mmol) was added and thereaction mixture was stirred at r.t. for 2 days. After evaporation, the residue was stirred withhot H20 (3 L), cooled down and the product was filtered (51%).

As the rapid development of chemical substances, we look forward to future research findings about 119-39-1

Reference£º
Patent; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; FOKIN, Valery; SHARPLESS, Barray, K.; ECKMANN, Lars; MIYAMOTO, Yukiko; WO2014/205414; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

New learning discoveries about 253-52-1

253-52-1, As the paragraph descriping shows that 253-52-1 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.253-52-1,Phthalazine,as a common compound, the synthetic route is as follows.

A. A solution of phthalazine (2.5 g, 19.2 mmol) in concentrated sulfuric acid (30 mL) is treated slowly with potassium nitrate (2 g, 19.2 mmol). After 18 h the solution is cooled. Water (30 mL) is added. The solution is basified using 10 M NaOH to pH 13 (litmus). The solution is cooled for 18 h, filtered to give 5-nitro-phthalazine (0.93 g).

253-52-1, As the paragraph descriping shows that 253-52-1 is playing an increasingly important role.

Reference£º
Patent; Calvo, Raul R.; Cheung, Wing S.; Player, Mark R.; US2006/116368; (2006); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Simple exploration of 253-52-1

253-52-1, 253-52-1 Phthalazine 9207, aphthalazine compound, is more and more widely used in various fields.

253-52-1, Phthalazine is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol.

253-52-1, 253-52-1 Phthalazine 9207, aphthalazine compound, is more and more widely used in various fields.

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Brief introduction of 253-52-1

253-52-1, The synthetic route of 253-52-1 has been constantly updated, and we look forward to future research findings.

253-52-1, Phthalazine is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(C) Phthalazine-5,8-dione precursors (Y1 and Y4=C, Y2 and Y3=N) used in the process of the present invention were prepared according to the following reaction scheme 4. The detailed procedure is described in (i) J. Med. Chem., 48, 744-752, and (ii) Bioorganic and Medical Chemistry Letters, 27, 2577-2580.

253-52-1, The synthetic route of 253-52-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Gerogetown University; Brown, Milton L.; Paige, Mikell; Torestsky, Jeffrey A.; Uren, Aykut; Kosturko, George; Bulut, Gullay; (58 pag.)US9522908; (2016); B2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Some tips on 119-39-1

119-39-1 Phthalazin-1(2H)-one 8394, aphthalazine compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.119-39-1,Phthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

A solution of 2H-Phthalazin-l-one (1.01 g, 5 mmol) in phosphorus oxychloride (5 mL) was stirred at 130 0C for 1.5 h. The phosphorus oxychloride was removed under reduced pressure. The residue was partitioned between water (10 mL) and methylene chloride (50 mL). The methylene chloride phase was separated, dried over MgSO4, and evaporated to give a yellow solid (1.015 g, 90%).[00139] The above crude product (83 mg, 0.50 mmol), N-methyl-4-methoxy-aniline (69 mg, 0.50 mmol) and cesium carbonate (200 mg, 0.61 mmol) were stirred in anhydrous DMF (1 mL) in a sealed tube at rt for 17 h. The reaction was diluted with water (5 mL) and extracted with EtOAc (2×20 mL). The EtOAc solution was washed with water (5 mL), dried, and evaporated to give a brown residue. The crude product was purified by column chromatography (SiO2, EtO Ac:hexanes/15-50%) to give a light yellow solid (5 mg, 4%): 1H NMR (CDCl3) 9.11 (s, IH), 7.85 (m, IH), 7.66 (m, IH), 7.48-7.47 (m, 2H), 7.40-7.10 (m, 2H)5 6.87-6.81 (m, IH), 3.80 (s, 3H), 3.63 (s, 3H)., 119-39-1

119-39-1 Phthalazin-1(2H)-one 8394, aphthalazine compound, is more and more widely used in various fields.

Reference£º
Patent; MYRIAD GENETICS, INC.; CYTOVIA, INC.; WO2006/74223; (2006); A2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem