Month: October 2020

75884-70-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6-Bromophthalazin-1(2H)-one, cas is 75884-70-7,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

6-bromopyridazine-1(2H)-one (0.80 g, 3.55 mmol), A solution of cesium carbonate (2.89 g, 8.86 mmol) and 2-chloromethyloxazole (0.50 g, 4.25 mmol) in N,N-dimethylformamide (10 mL) was stirred at 50 C for 5 h. The reaction system was cooled to room temperature, poured into water, and the solid was collected by filtration. Wash the filter cake with water and petroleum ether, respectively. Drying under reduced pressure gave Compound 3.1 (0.84 g, yield: 78%) as a yellow solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6-Bromophthalazin-1(2H)-one, 75884-70-7

Reference£º
Patent; Shanghai Dinuo Pharmaceutical Technology Co., Ltd.; Gao Daxin; Yang Heping; Chen Shoujun; Gao Yaqiao; Wang Longsheng; (32 pag.)CN109721597; (2019); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Name is 5-Bromophthalazine, as a common heterocyclic compound, it belongs to phthalazine compound, and cas is 103119-78-4, its synthesis route is as follows.

Methyl phthalazine-5-carboxylate. To a 140 mL pressure flask was added 5-bromophthalazine (3.5 g, 17 mmol), palladium (II) acetate (0.98 g, 4.4 mmol), triphenylphosphine (1.3 g, 5.0 mmol), potassium acetate (2.1 g, 21 mmol), MeOH (20 mL) and DMF (20 mL). The flask was sealed and purged with CO (3 x). The flask was charged with CO to 40 PSI and stirred at 100¡ãC 15 hours. The suspension was filtered through Celite, the cake was washed with MeOH, and the filtrate was concentrated. The residue was taken up in DCM and washed with saturated sodium bicarbonate (2 x), saturated sodium chloride (2 x) and water (2 x). The organic layer was dried over sodium sulfate, filtered and concentrated in vacuo. The residue was adsorbed on to a plug of silica gel and purified by chromatography through a Redi-Sep pre-packed silica gel column, eluting with a gradient of EtOAc in hexane to provide methyl phthalazine-5- carboxylate (1.0 g, 32 percent). LCMS (M+H) 189.2 calc. for C10H9N2O2 189.1, 1H NMR (400 MHz, CDCl3): delta ppm 4.05 (s, 3H) 8.06 (d, J=8.41 Hz, 1H) 8.51-8.56 (m, 1H) 8.71 (d, 1H) 9.64 (s, 2H).

103119-78-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,103119-78-4 ,5-Bromophthalazine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; AMGEN INC.; WO2009/11871; (2009); A2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Name is 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, as a common heterocyclic compound, it belongs to phthalazine compound, and cas is 763111-47-3, its synthesis route is as follows.

General procedure: Intermediates 8 (1 eq) and respective 9-chloroacridine derivatives 4a-4f (1.1 eq) were added to a round flask, and then excessphenol was added as solvent. The reaction system was warmed up to 60 C until phenol was melted and stirred for 0.5 h under argonprotection. Then the mixture was warmed up to 120 C and continued to reaction for more 2 h. After the reaction was completed, themixture was added to ethyl ether drop by drop [2]. The precipitate was filtered and washed twice with new ethyl ether to give pureproducts 9a-9f, which were then characterized by 1H NMR, 13C NMR, melting point and high resolution mass spectrum (HRMS, ESI).

763111-47-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,763111-47-3 ,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Dai, Qiuzi; Chen, Jiwei; Gao, Chunmei; Sun, Qinsheng; Yuan, Zigao; Jiang, Yuyang; Chinese Chemical Letters; vol. 31; 2; (2020); p. 404 – 408;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

763111-47-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

An appriopriate aldehyde (0.2 mmol) and 4- [4-FLUORO-3- (PIPERAZINE-L- carbonyl) BENZYL]-2H-PHTHALAZIN-1-ONE (2) (0.24 mmol) were dissolved in dichloromethane (2 ml). Sodium triacetoxyborohydride (0.28 mmol) and glacial acetic acid (6.0 mmol) were then added and stirred at room temperature for 16 hours. The reaction mixtures were then purified by preparative HPLC.

The chemical industry reduces the impact on the environment during synthesis,763111-47-3,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; KUDOS PHARMACEUTICALS LIMITED; MAYBRIDGE LIMITED; WO2004/80976; (2004); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

1242156-59-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

1518 mg (5.75 mmol) of 2,6-dibromobenzaldehyde, 506 mg (2.30 mmol) of 6-tert-butyl-8-fluoro-2H-phthalazin-1-one, 1499 mg (4.60 mmol) of cesium carbonate, 42 mg (0.22 mmol) of copper(I) iodide, and 115 mg (0.479 mmol) of 4,7-dimethoxy-1,10-phenanthroline were weighed into a 20 mL reaction vial fitted with a stir bar and septum cap. Added 8 mL of anhydrous dioxane. Purged the reaction mixture with nitrogen for 15 min. Stirred at 100 C. for 16 h. Partitioned the reaction mixture between 25 ml, of 10% MeOH/CH2Cl2 and 25 mL of water. Separated phases and extracted the aqueous phase with 25 mL of 10% MeOH/CH2Cl2. Filtered to break the stable emulsion. The combined organic extracts were washed with 75 mL of brine, dried over MgSO4, and the solvent was removed on rotavap. Purified by silica gel flash chromatography using gradient elution with 0?40% EtOAc/hexane to obtain 406 mg of the title compound as a yellow solid. MS (ESI) doublet 403, 405 (M+H)+.

The chemical industry reduces the impact on the environment during synthesis,1242156-59-7,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Berthel, Steven; Firooznia, Fariborz; Fishlock, Daniel; Hong, Jun-Bae; Lou, Yan; Lucas, Matthew; Owens, Timothy D.; Sarma, Keshab; Sweeney, Zachary Kevin; Taygerly, Joshua Paul Gergely; US2010/222325; (2010); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to phthalazine compound, name is 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, and cas is 1242156-59-7, its synthesis route is as follows.

Step 2: To a solution of 6-tert-butyl-8-fluorophthlazine-1(2H)-one (prepared according to US2010/0222325) 36 mg, 0.16 mmol) and 1-(3-bromo-2-formylphenyl)-1H-indole-3-carbonitrile (59 mg, 0.18 mmol) in dry dimethylsulfoxide (1.8 mL) was added sodium bicarbonate (31 mg, 0.36 mmol) under an argon atmosphere. Next copper iodide (35 mg, 0.18 mmol) was added and the mixture was heated to 110 C. for 2 hours. The reaction was cooled to ambient and taken up in water (40 ml) and dichloromethane (40 ml). The material was filtered through a plug of celite, rinsing well with dichloromethane. The filtrate was transferred to a reparatory funnel and the dichloromethane phase was collected. This was washed with a 50% solution of diluted brine (40 ml). The organic phase was collected and the aqueous phases back extracted with dichloromethane (2¡Á35 ml). The dichloromethane phases were combined, dried (MgSO4), filtered and stripped. Then the identical reaction was repeated on a larger scale using 1-(3-bromo-2-formylphenyl)-1H-indole-3-carbonitrile (290 mg, 0.89 mmol) and similar scaled amounts of the reagents described above and under identical procedure and work up. The crude from the two reactions was combined and purified by HPLC (silica gel, eluting with 100% CH2Cl2 to 1% MeOH/CH2Cl2) to provide a semi-pure product. The material was further purified by preparative thin layer chromatography (3 plates, eluting with 0.5% MeOH/CH2Cl2 and then re-eluting with 0.75% and then 1% MeOH/CH2Cl2). The product band was collected to provide 1-(3-(6-tert-butyl-8-fluoro-1-oxophthalazin-2(1H)-yl)-2-formylphenyl)-1H-indole-3 carbonitrile as a yellow foamy solid. (384 mg, 77% yield). LC/MS calcd for C28H21FN4O2 (m/e) 464.49, obsd 465.0 (M+H, ES+): 1H NMR (300 MHz, CHLOROFORM-d) delta ppm 1.42 (s, 9H) 7.24-7.32 (m, 1H) 7.34-7.41 (m, 2H) 7.46-7.60 (m, 3H) 7.75 (d, J=7.55 Hz, 1H) 7.81 (s, 1 H) 7.83-7.87 (m, 1H) 7.90 (t, J=7.96 Hz, 1H) 8.25 (d, J=2.64 Hz, 1H) 9.56 (s, 1H).

1242156-59-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1242156-59-7 ,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Billedeau, Roland Joseph; Kondru, Rama K.; Lopez-Tapia, Francisco Javier; Lou, Yan; Owens, Timothy D.; Qian, Yimin; So, Sung-Sau; Thakkar, Kshitij C.; Wanner, Jutta; US2012/295885; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

253-52-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Phthalazine, cas is 253-52-1,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Phthalazine, 253-52-1

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

119-39-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 3-(2-bromoethoxy)benzaldehyde (6.00 g), 1(2H)-phthalazinone (4.21 g), potassium carbonate (7.24 g) and N,N-dimethylformamide (40 ml) was stirred at 80C for 5 hours. After cooling, the reaction mixture was poured into water, which was extracted with ethyl acetate. The ethyl acetate layer was washed with saturated aqueous sodium chloride solution, dried (MgSO4) and concentrated to obtain 3-[2-[1-oxo-2(1H)-phthalazinyl]ethoxy]benzaldehyde (6.94 g, yield 90%) as colorless crystals. This was recrystallized from acetone-hexane. Melting point: 110-111C

The chemical industry reduces the impact on the environment during synthesis,119-39-1,Phthalazin-1(2H)-one,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Takeda Chemical Industries, Ltd.; EP1228067; (2004); B1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to phthalazine compound, name is Phthalazin-1(2H)-one, and cas is 119-39-1, its synthesis route is as follows.

General procedure: The Mitsunobu reaction was carried out under argon. To a stirred solution of TPP (0,0102 mol) in dry THF (10 ml) was slowly added DEAD (0,0102 mol, solution in toluene c ? 40%) at -10C. Then a solution of phthalazinone 1 (0.0068 mol) in THF (44 ml) was added dropwise. The whole lot was mixed for 15 min at -10C and next was added the appropriate derivative of N-methylethanolamine 7 or 8 (0.00748 mol) in THF (5 ml) at -10C. The mixture was stirred during 2 hrs at -10C, after which time, the reaction mixture was warmed to ambient temperature and stirred in this conditions for 20 hrs. All volatile materials were removed under reduced pressure, ethyl ether (20ml) was added to the residue and the whole lot was stirred for 0.5 hrs at ambient temperature. The separate white solid was collected by flirtation, washed with ether and filtrate was evaporated to dryness. The residue was subjected to column chromatography to give the pure product 11.

119-39-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,119-39-1 ,Phthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Malinowski, Zbigniew; Szczes?niak, Aleksandra K.; Pakulska, Wanda; Sroczy?ski, Dariusz; Czarnecka, Elzbieta; Epsztajn, Jan; Synthetic Communications; vol. 44; 24; (2014); p. 3572 – 3581;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to phthalazine compound, name is 7-Bromophthalazin-1(2H)-one, and cas is 152265-57-1, its synthesis route is as follows.

10198] 7-l3romo- 1 -chlorophthalazine (9a) In a flame dried25 mE round bottom flask was added 7-bromophthalazin-1 (2H)-one (205 mg, 0.91 mmol), anhydrous acetonitrile (9 mE), and phosphorus oxychloride (0.3 mE, 3.22 mmol). The mixture was refluxed for 2 hours, then cooled to 00 C., diluted with dichloromethane (20 mE), and quenched with a drop- wise addition of sat. aq. NaHCO3 (20 mE). The biphasic mixture was stirred vigorously and allowed to warm to room temperature. Afier 1 hour the layers were separated and the aqueous was extractedwith dichioromethane (2×30 mE). The combined organic layers were washed with sat. aq. NaHCO3 (25 mE), washed with brine (20 mE), dried over Na2SO4, and concentrated to yield 9a as an orange solid in 91% yield. ?HNMR (500 MHz, CDC13) oe 9.45 (s, 1H), 8.49-8.5 1 (m, 1H), 8.10 (dd, J=8.8, 2.0 Hz, 1H), 7.91 (d, J=8.8 Hz, 1H). ECMS found 242.9 [M+H].

152265-57-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,152265-57-1 ,7-Bromophthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Northeastern University; POLLASTRI, Michael P.; MEHTA, Naimee; DEVINE, William; WOODRING, Jennifer; SWAMINATHAN, Uma; US2015/259331; (2015); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem