Month: November 2020

One of the major reasons is to use measurements of the macroscopic properties of a system, 119-39-1, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound, introduce a new downstream synthesis route.

A. Novel Preparation of 1-Chlorophthalazine. One mole equivalent (250 g) of 1(2H)-phthalazinone and 3.8 mole equivalents (775 g) of phosphorus oxychloride were charged into a 3-L, 3-necked flask fitted with a temperature probe and condenser. The slurry was stirred and heated to 80 C., maintained at that temperature for 30 minutes, and then the heat source was removed. Thin layer chromatographic analysis indicated that conversion to 1-chlorophthalazine was complete. The mixture was allowed to cool to room temperature, and 1.6 L of hexanes was added. The resulting slurry was stirred for several minutes, and the hexane layer was decanted. Addition of hexanes and decantation was repeated two more times. Then 1.6 L of tetrahydrofuran was added; as the solution was stirred, an off-white precipitate formed. The solid was isolated by filtration and washed with 250 mL of cold tetrahydrofuran to afford an 85-100% yield of 1-chlorophthalazin, the desired product, as an off-white powder that could be dried and characterized.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Phthalazin-1(2H)-one, 119-39-1

Reference£º
Patent; Nelson, Deanna J.; US2005/137397; (2005); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. 19064-74-5, If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.6-Bromophthalazine, cas is 19064-74-5,the phthalazine compound. A new synthetic method of this compound is introduced below.

Example 17 N-(4-Methyl-3-phthalazin-6-yl-phenyl)-4-piperidin-1-ylmethyl-3-trifluoromethyl-benzamide Nitrogen is bubbled through a mixture of 0.295 g (0.648 mmol) N-(3-bromo-4-methyl-phenyl)-4-piperidin-1-ylmethyl-3-trifluoromethyl-benzamide, 0.191 g (1.94 mmol) potassium acetate and 0.198 g (0.778 mmol) bis-(pinacolato)-diboron in 3.12 mL DMF for about 10 minutes. After the addition of 0.032 g (0.0391 mmol) 1,1′-bis(diphenylphospino)ferrocene-palladium dichloride the mixture is heated to 80 C. for 6 h. The N-[4-methyl-3-(4,4,5,5-tetramethyl-[1,3,2]dioxaborolan-2-yl)-phenyl]-4-piperidin-1-ylmethyl-3-trifluoromethyl-benzamide intermediate formed is not isolated. To the cooled dark suspension is added under nitrogen 6-bromophthalazine (0.1355 g, 0.648 mmol), caesium carbonate (0.316 g, 0.97 mmol) and 0.0225 mg (0.0195 mmol) tetrakis(triphenylphosphine)palladium. The dark mixture is heated to 80 C. for 15 h, cooled to rt and filtered. The solids are washed with DMF and the combined filtrates are evaporated under reduced pressure. The residue is partitioned between ethyl acetate and saturated sodium bicarbonate solution and the organic phase washed with brine, dried with sodium sulphate and evaporated. The crude product is purified by chromatography using a 40 g silica gel column on a Combi-Flash Companion (Isco Inc.) apparatus. A gradient of ethyl acetate/methanol (0?10% methanol) is used. Pure fractions are pooled and evaporated to give the title compound as tan crystals; m.p. 175-177 C.; Rf (ethyl acetate/methanol 9:1)=0.39; HPLC tR=2.50 min; MS-ES+: (M+H)+=505.

19064-74-5, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,19064-74-5 ,6-Bromophthalazine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Caravatti, Giorgio; Furet, Pascal; Imbach, Patricia; Martiny-Baron, Georg; Perez, Lawrence Blas; Sheng, Tao; US2006/35897; (2006); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound, below Introduce a new synthetic route., 763111-47-3

EXAMPLE A.6. Compound c-5 (127l): 4-(4-fluoro-3-(4-(3-(3-iodophenyl)propanoyl)piperazine-1-carbonyl)benzyl)phthalazin-l(2H)-one. A solution of 4-(4-fluoro-3-(piperazine-l-carbonyl)benzyl)phthalazin-l(2H)-one (10 mg, 0.0275 mmol), HBTU (16 mg, 0.0413 mmol) triethylamine (40 mu, 0.3 mmol) and 3-(3-iodophenyl)propionic acid (7.6 mg, 0.0275 mmol) in 400 mu of acetonitrile was stirred overnight at room temperature. The crude product was then purified by preparative HPLC and the isolated product dried at vacuum to obtain a white solid (5.1 mg, 38%). 1H NMR (CDCI3) delta = 10.33 (s, 1H), 8.41-8.39 (d, 1H), 7.71-7.63 (m, 3H), 7.51-7.45 (m, 2H), 7.27-7.25 (m, 2H), 7.12-6.92 (m, 3H), 4.22 (s, 2H), 3.65-3.12 (m, 8H), 2.88- 2.83 (m, 2H), 2.59-2.48 (m, 2H). LC-ESI-MS (+) m/z = 647.1 [M+Na+]+. HRMS-ESI [M+H+]+ m/z calculated for [C29H26FIN403 625.1112, found 625.1111.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 763111-47-3, if you are interested., 763111-47-3

Reference£º
Patent; MEMORIAL SLOAN KETTERING CANCER CENTER; REINER, Thomas; LEWIS, Jason S.; WEBER, Wolfgang; RODRIGUEZ, Beatriz Salinas; CARNEY, Brandon; CARLUCCI, Giuseppe; (89 pag.)WO2016/33293; (2016); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 6-Bromophthalazin-1(2H)-one, cas is 75884-70-7,the phthalazine compound, below Introduce a new synthetic route., 75884-70-7

A suspension of 134D (315 mg, 1.4 mmol) and phosphorus oxychloride (2 mL) was heated at 110 C. for 1 h. The reaction mixture was cooled to rt and the solvent was evaporated in vacuo. The residue was cooled in an ice bath and cold water and 1N NaOH solution were added until the mixture was basic. The yellow solid was filtered and washed with water to afford 134E (295 mg, 87%). LC-MS m/z: 245.13 (M+H)+.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 75884-70-7, if you are interested., 75884-70-7

Reference£º
Patent; Bristol-Myers Squibb Company; US2007/3539; (2007); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.1,4-Dioxo-1,2,3,4-tetrahydrophthalazine-6-carboxylic acid, cas is 42972-13-4,the phthalazine compound. 42972-13-4. Here is a downstream synthesis route of the compound 42972-13-4

l-Bromo-4-oxo-3,4-dihydro-phthalazine-6-carboxylic acidl,4-Dioxo-l,2,3,4-tetrahydro-phthalazine-6-carboxylic acid (91.Og, 0.44mol) was suspended in dichloroethane (1.0L) and phosphorus pentabromide (761.Og,1.77mol) was added in three portions and the reaction heated to reflux for 24 hours. The reaction was cooled to room temperature and poured onto ice (2.50kg) EPO and the resulting precipitate filtered and washed with water to give the crude product (13Og).This crude material was suspended in acetic acid (1.60L) and heated to 125C for 2 hours. The reaction was cooled to room temperature and poured onto ice (1.5kg) and the resulting precipitate filtered. The solid was washed with water and dried to give the title compound (85g, 73% yield) as a yellow solid. MS (ESI+) = (M+H)+ 310 & 312

42972-13-4, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 42972-13-4

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; WO2006/32518; (2006); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

119-39-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

2H-phthalazin-1-one (150 mmol), (3,4-dihydroisoquinolin-2(1H)-carboxylic acid tert-butyl ester-5-yl)-carbamic acid o-chlorophenyl ester (195 mmol) were placed in a reaction flask, then DMF100 ml was added and the reaction was carried out at 55 C overnight. The reaction was stopped, added 300 ml of ethyl acetate, 200ml of dichloromethane, and extracted. The organic phase was separated, and the aqueous phase was extracted with dichloromethane (3*50 ml). The organic phase was combined, dried over anhydrous sodium sulfate, and Purification by column chromatography gave the title compound.

119-39-1. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.119-39-1, if you are interested, you can browse my other articles.

Reference£º
Patent; Nanjing Advanced Biological Materials And Process Equipment Institute Co., Ltd.; Guo Chengjie; (16 pag.)CN109336863; (2019); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

119-39-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

To a round bottom flask containing THF (10 mL) under an atmosphere of nitrogen was added, phthalazone (500 mg, 3.41 mmol), di-/c/ -butyl dicarbonate (1.11 g, 5.12 mmol) and DMAP (620 mg, 5.12 mmol). The reaction was stirred overnight at room temperature before the solvent was removed in vacuo and the crude material purified directly via flash column chromatography using -pentane: EtOAc (5: 1) tert- Butyl 1 -oxophthalazine-2( i H)- carboxylate as a white solid (765 mg, 3.11 mmol, 91%). 3H NMR (400 MHz, CDCb) d = 8.43 (dd, 7 = 7.9, 1.3 Hz, 1H), 7.83 (td, 7 = 7.5, 1.4 Hz, 1H), 7.77 (td, 7 = 7.6, 1.3 Hz, 1H), 7.68 (dd, 7 = 7.5, 1.3 Hz, 1H), 1.66 (s, 9H);13C NMR (100 MHz, CDCb) d = 158.3, 150.9, 138.9, 134.2, 132.3, 129.2, 128.7, 127.5, 126.4, 85.9, 27.8 (3C); IR (v, cm4): 2980, 1720, 1641, 1470, 1325, 1130; HRMS (ESI) for C13H14N2O3 (0556) [M+H]+ requires 247.1012 found 247.1015; Mp: 81 – 83C

119-39-1. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.119-39-1, if you are interested, you can browse my other articles.

Reference£º
Patent; OXFORD UNIVERSITY INNOVATION LIMITED; GOUVERNEUR, Veronique; CORNELISSEN, Bart; WILSON, Thomas Charles; (152 pag.)WO2019/186135; (2019); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

152265-57-1, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 7-Bromophthalazin-1(2H)-one, cas is 152265-57-1,the phthalazine compound, below Introduce a new synthetic route.

A mixture of 7-bromo-l,2-dihydrophthalazin-l-one (4.1 g, 18.22 mmol) and bis(pinacolato)diboron (12.95 g, 51.01 mmol) was dissolved in 1,4-dioxane (150 mL) under nitrogen. Potassium acetate (5.36 g, 54.66 mmol) was added, and the reaction mixture was degassed with N2 for 5 minutes. Pd(dppf)Cl2 (0.74 g, 0.91 mmol) was added and the mixture was heated at 110C for 1.5 h, then cooled and diluted with DCM. The solids were removed by filtration through celite. The residue was washed with DCM and the combined organic phases were concentrated in vacuo. The resulting solid was triturated in heptane (30 mL) and diethyl ether (15 mL). The solid was further triturated with heptane (30 mL) and diethyl ether (15 mL), then the precipitate was collected by filtration, to give the title compound (5.1 g, 81%). deltaEta (250 MHz, DMSO-d6) 12.68 (s, 1H), 8.50 (s, 1H), 8.37 (s, 1H), 8.10 (dd, J7.8, 1.1 Hz, 1H), 7.88 (d, J7.8 Hz, 1H), 1.30 (s, 12H). Method B: HPLC-MS MH+ mlz 273, RT 1.78 minutes (97%)

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 152265-57-1

Reference£º
Patent; UCB BIOPHARMA SPRL; BRACE, Gareth Neil; CHOVATIA, Prafulkumar Tulshibhai; FOULKES, Gregory; JOHNSON, James Andrew; JONES, Severine Danielle; KROEPLIEN, Boris; LECOMTE, Fabien Claude; LOKE, Pui Leng; LOWE, Martin Alexander; MANDAL, Ajay; NORMAN, Timothy John; PALMER, Christopher Francis; PEREZ-FUERTES, Yolanda; PORTER, John Robert; SMYTH, Donald; TRANI, Giancarlo; UDDIN, Muhammed; ZHU, Zhaoning; (207 pag.)WO2016/198400; (2016); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 763111-47-3, name is 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, introduce a new downstream synthesis route as follows. 763111-47-3

(c) 4-[3-(4-Cyclopropanecarbonyl-piperazine-1-carbonyl)-4-fluoro-benzyl]-2H-phthalazin-1-one (A)To a stirred suspension of compound B (1290 g) in CH2CI2 (15480 ml) under nitrogen was added a pre-mixed solution of triethylamine (470 ml) and cyclopropane carbonyl chloride (306 ml) in CH2CI2 (1290 ml) dropwise with the temperature kept below 2O0C. The solution was then stirred at 10-15C for 15 minutes and sampled for completion. The reaction mixture was found to contain only 1.18% of starting material B and so the reaction was deemed complete and the batch was then worked-up.The reaction mixture was washed with water (7595 ml), 5% citric acid solution (7595 ml), 5% sodium carbonate solution (7595 ml) and water (7595 ml). The organic layer was then dried over magnesium sulfate (50Og).The CH2CI2 containing product layer was then isolated, filtered through Celite and charged to a 25I vessel. CH2CI2 (8445 ml) was then distilled out at atmospheric pressure and ethanol (10000 ml) added. Distillation was then continued with every 4000 ml of distillate that was removed being replaced with ethanol (4000 ml) until the head temperature reached 73.70C. The reaction volume was then reduced (to 7730 ml) by which time the head temperature had reached 78.90C and the solution was allowed to cool to 8C overnight. The solid was then filtered off, washed with ethanol (1290 ml) and dried at 700C overnight.Yield = 1377.3 g (90%). HPLC purity (99.34% [area %]). Contained 4.93% ethanol and 0.45% CH2CI2 by GC.

Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.763111-47-3, if you are interested, you can browse my other articles.

Reference£º
Patent; KUDOS PHARMACEUTICALS LIMITED; WO2008/47082; (2008); A2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 75884-70-7, name is 6-Bromophthalazin-1(2H)-one, introduce a new downstream synthesis route as follows. 75884-70-7

Step 3. 6-Vinylphthalazine-1(2H)-one (BI27) A solution of 6-bromophthalazine-1(2H)-one (0.25 g, 1.11 mmol), potassium vinyl trifluoroborate (0.446 g, 3.33 mmol) and K2CO3 (0.46 g, 3.33 mmol) in DMSO (2 mL) was degassed with argon for 20 min at ambient temperature. PdCl2(dppf) (0.04 g, 0.055 mmol) was added at ambient temperature, and the reaction mixture was heated to 80 C. for 2 h. The reaction mixture was cooled to ambient temperature and filtered through celite bed under vacuum and washed with ethyl acetate. The reaction mixture was extracted with ethyl acetate and the combined ethyl acetate layer dried over Na2SO4 and concentrated under reduced pressure to afford the crude product. The crude compound was purified by column chromatography (SiO2, 100-200 mesh; 50% ethyl acetate/petroleum ether) to afford the title compound as a brown solid (0.12 g, 63%): 1H NMR (400 MHz, DMSO-d6) delta 13.61 (br, 1H), 8.33 (m, 1H), 8.19 (m, 1H), 8.01 (m, 2H), 6.97 (m, 1H), 6.15 (m, 1H), 5.56 (d, J=10.8 Hz, 1H); ESIMS m/z 172.93 ([M+H]+); IR (thin film) 1748, 1655, 3241 cm-1.

Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.75884-70-7, if you are interested, you can browse my other articles.

Reference£º
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US9211280; (2015); B2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem