Month: November 2020

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound. 763111-47-3. Here is a downstream synthesis route of the compound 763111-47-3

4-(4-Fluoro-3-(piperazin-1-yl-carbonyl)-benzyl)pyridazine-1(2H)one (5) (0.78 g, 2.13 mmol) was added to a 25 ml three-necked flask.Dichloromethane (6.5 ml) and triethylamine (0.52 g, 5.14 mmol) were added, and the mixture was stirred and cooled to 1-10 C.Further, 3-methyl crotonyl chloride (304 mg, 2.56 mmol) was added dropwise, and the mixture was warmed to room temperature and stirred for 1 hour.TLC showed the reaction was complete; the reaction mixture was directly concentrated to dryness, and the residue was mixed with water and then stirred for 1 hour and then filtered.Obtained as an off-white solid.The yield was 63%.

763111-47-3, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 763111-47-3, you can also browse my other articles.

Reference£º
Patent; Shanghai Bobang Pharmaceutical Technology Co., Ltd.; Gao Heyong; Liu Zhende; Zhang Wensheng; (28 pag.)CN108383798; (2018); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Phthalazine, cas is 253-52-1,the phthalazine compound. 253-52-1. Here is a downstream synthesis route of the compound 253-52-1

To a stirred solution of tert-butyl acetate(2.67 g, 3.08 mL, 23.0 mmol) in dry THF (40 mL) at ?78 ¡ãC was added dropwise n-butyllithium(2.5 M in hexanes, 7.68 mL, 19.2 mmol) over a period of 30 min. The solution was warmed to ?25 ¡ãCand stirred at this temperature for a period of 30 min. To this reaction mixture was added a solution of1 (2.00 g, 15.4 mmol) in dry THF (25 mL), and stirring was continued for an additional 30 min at 0 ¡ãC.The reaction mixture was poured into saturated NH4Cl (100 mL) and extracted with EtOAc (3 ¡Á 50 mL).The organic extracts were washed with saturated NaCl (50 mL), dried (MgSO4) and concentrated toafford 8 as a light brown oil. The crude product 8 was then dissolved in DCM (50 mL), andtriethylamine (1.86 g, 2.56 mL, 18.4 mmol) was added, followed by dropwise addition of acryloylchloride (1.39 g, 1.25 mL, 15.4 mmol) at 0 ¡ãC. The reaction mixture was stirred at 0 ¡ãC for a period of2 h. The reaction was quenched with saturated NaCl (50 mL), and the organic layer was separated. Theaqueous layer was extracted with DCM (2 ¡Á 50 mL) and the combined organic layers were washedwith saturated NaCl (50 mL), dried (MgSO4), filtered, and concentrated to afford the crude product.The crude product was purified on a silica gel column eluted with hexanes?EtOAc (4:1) to afford 9a(4.00 g, 87percent) as a colorless liquid.

253-52-1, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 253-52-1, you can also browse my other articles.

Reference£º
Article; Nammalwar, Baskar; Muddala, N.Prasad; Bourne, Christina R.; Henry, Mary; Bourne, Philip C.; Bunce, Richard A.; Barrow, Esther W.; Berlin, K.Darrell; Barrow, William W.; Molecules; vol. 19; 3; (2014); p. 3231 – 3246;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, 1242156-59-7, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7,the phthalazine compound, introduce a new downstream synthesis route.

Step 2: 1-(3-Bromo-2-formylphenyl)-3-(4-(morpholine-4-carbonyl)phenylamino)-1H-pyrazole-4-carbonitrile (34 mg, 0.0708 mmol), 6-tert-butyl-8-fluorophthalazin-1(2H)-one (31.2 mg, 0.142 mmol), cuprous iodide (27 mg, 0.142 mmol) and sodium bicarbonate (14.9 mg, 0.177 mmol) were combined in 1 mL of DMSO. The solution was degassed with argon and then heated in a microwave at 120 C. for 1 hr. The resulting mixture was extracted with ethyl acetate and ammonium chloride solution. The organic layer was concentrated and purified by flash column chromatography using ethyl acetate (containing 5% methanol) in hexanes (5% to 80% linear gradient in 15 minutes, 12 g silica gel) to give the pure desired product. This material was triturated with ether in hexanes and filtered to give 1-[3-(6-tert-butyl-8-fluoro-1-oxo-1H-phthalazin-2-yl)-phenyl]-3-[4-(morpholine-4-carbonyl)-phenylamino]-1H-pyrazole-4-carbonitrile (18.2 mg, 41.5% yield) as a pale pink solid. LC/MS clacd for C33H30FN7O3 (m/e) 591.24, obsd 592.0 (M+H, ES+); 1H NMR (400 MHz, DMSO-d6) delta ppm 1.38 (s, 9H), 3.50 (br., 4H), 3.59 (br., 4H), 7.37 (d, J=8.6 Hz, 2H), 7.59 (d, J=8.3 Hz, 1H), 7.65-7.71 (m, 3H), 7.78 (d, J=13.1 Hz, 1H), 7.87-7.93 (m, 2H), 8.08 (s, 1H), 8.58 (d, J=2.3 Hz, 1H), 9.29 (s, 1H), 9.47 (s, 1H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, 1242156-59-7

Reference£º
Patent; Billedeau, Roland Joseph; Kondru, Rama K.; Lopez-Tapia, Francisco Javier; Lou, Yan; Owens, Timothy D.; Qian, Yimin; So, Sung-Sau; Thakkar, Kshitij C.; Wanner, Jutta; US2012/295885; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.2-Fluoro-5-((4-oxo-3,4-dihydrophthalazin-1-yl)methyl)benzoic acid, cas is 763114-26-7,the phthalazine compound. An updated downstream synthesis route of 763114-26-7 as follows. 763114-26-7

A solution of 1-5 – [(3,4-dihydro-4-oxo-l-phthalazinyl) methyl] -2- fluorobenzoic acid (60.0 g, 0.20 mol)Suspended in 600 mL of acetonitrile,Anhydrous piperazine (43.0 g, 0.50 mol)Piperazine dihydrochloride (79.0 g, 0.50 mol)Concentrated sulfuric acid (2.78 ml, 0.04 mol)Heated to 78-80 C under reflux for 7 to 8 hours,Drop to room temperature,Concentrated under reduced pressure acetonitrile, water was added 1000ml, stirred for 30min; concentrated ammonia was added dropwise to a PH value of 7-8, stirred 2h, suction filtration,44.1 g of 1- [5 – [(3,4-dihydro-4-oxo-1-phthalazinyl) methyl] -2-fluorobenzoyl] piperazine was obtained in a yield of 60.1%.1- [5 – [(3,4-dihydro-4-oxo-1-phthalazin-yl) methyl] -2-fluorobenzoyl] piperazine 1H NMR, (400 MHz) see Figure 1.

763114-26-7, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 763114-26-7, you can also browse my other articles.

Reference£º
Patent; Shanghai Pharmaceutical Group Co., Ltd.; Deng Yu; (7 pag.)CN106554316; (2017); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound. 763111-47-3. Here is a downstream synthesis route of the compound 763111-47-3

General procedure: Compound 4 (400 mg, 1.09 mmol, 1 eq) was dissolved in acetonitrile(10 ml), and then 5a-c (1 eq) and DIEA (2 eq) were added.The mixture was stirred at room temperature for 2 h, and then theprecipitate was filtered, washed with water, acetonitrile and ethylether, and dried to give products 6a-c.

763111-47-3, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 763111-47-3, you can also browse my other articles.

Reference£º
Article; Yuan, Zigao; Chen, Shaopeng; Sun, Qinsheng; Wang, Ning; Li, Dan; Miao, Shuangshuang; Gao, Chunmei; Chen, Yuzong; Tan, Chunyan; Jiang, Yuyang; Bioorganic and Medicinal Chemistry; vol. 25; 15; (2017); p. 4100 – 4109;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.Phthalazine, cas is 253-52-1,the phthalazine compound, introduce a new downstream synthesis route. 253-52-1

General procedure: Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol.

253-52-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,253-52-1 ,Phthalazine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound, below Introduce a new synthetic route., 119-39-1

A mixture of 3-(2-bromoethoxy)benzaldehyde (6.00 g), 1(2H)-phthalazinone (4.21 g), potassium carbonate (7.24 g) and N,N-dimethylformamide (40 ml) was stirred at 80C for 5 hours. After cooling, the reaction mixture was poured into water, which was extracted with ethyl acetate. The ethyl acetate layer was washed with saturated aqueous sodium chloride solution, dried (MgSO4) and concentrated to obtain 3-[2-[1-oxo-2(1H)-phthalazinyl]ethoxy]benzaldehyde (6.94 g, yield 90%) as colorless crystals. This was recrystallized from acetone-hexane. Melting point: 110-111C

119-39-1, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 119-39-1

Reference£º
Patent; Takeda Chemical Industries, Ltd.; EP1228067; (2004); B1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound, introduce a new downstream synthesis route. 763111-47-3

General procedure: Intermediates 8 (1 eq) and respective 9-chloroacridine derivatives 4a-4f (1.1 eq) were added to a round flask, and then excessphenol was added as solvent. The reaction system was warmed up to 60 C until phenol was melted and stirred for 0.5 h under argonprotection. Then the mixture was warmed up to 120 C and continued to reaction for more 2 h. After the reaction was completed, themixture was added to ethyl ether drop by drop [2]. The precipitate was filtered and washed twice with new ethyl ether to give pureproducts 9a-9f, which were then characterized by 1H NMR, 13C NMR, melting point and high resolution mass spectrum (HRMS, ESI).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, 763111-47-3

Reference£º
Article; Dai, Qiuzi; Chen, Jiwei; Gao, Chunmei; Sun, Qinsheng; Yuan, Zigao; Jiang, Yuyang; Chinese Chemical Letters; vol. 31; 2; (2020); p. 404 – 408;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

A balanced equation for a chemical reaction indicates what is reacting and what is produced, 1242156-59-7, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7,the phthalazine compound. An updated downstream synthesis route of 1242156-59-7 as follows.

Step 5. Preparation of 2-(6-tert-butyl-8-fluoro-l-oxo-lH-phthalazin-2-yl)-4-iodo-pyridine-3- carbaldehyde Method A In a 1 L round-bottomed flask, 6-tert-butyl-8-fluorophthalazin-l(2H)-one (5.6 g, 25.4 mmol) was combined with THF (300 ml) to give a colorless solution. Sodium hydride (1.12 g, 28.0 mmol) was added. The reaction mixture was stirred at ambient temperature for 10 min. 2-Fluoro-4- iodonicotinaldehyde (7.02 g, 28.0 mmol) was added and the reaction mixture was stirred at ambient temperature for 1 h. The reaction was complete as determined by LCMS analysis. The reaction mixture was quenched with saturated NH4CI. The reaction mixture was poured into 200 mL of H20 and extracted thrice with CH2CI2. The organic layers were washed with brine, then dried over Na2S04 and concentrated under vacuum. The resultant bright yellow solid was transferred into a filter funnel and the flask washed twice with a small volume of EtOAc to ensure complete transfer of the solid into the funnel. The liquid was filtered through. The solid was triturated twice with Et20 and dried under vacuum to afford the desired product as a cream- colored solid (8.09 g, 17.9 mmol, 70.5 % yield). (M+H)+ = 452 m/e. *H NMR (400 MHz, CUC -d) delta ppm 1.44 (s, 9 H) 7.49 – 7.54 (m, 1 H) 7.54 (d, 7=1.77 Hz, 1 H) 8.03 (d, 7=5.31 Hz, 1 H) 8.30 (d, 7=2.53 Hz, 1 H) 8.37 (d, 7=5.31 Hz, 1 H) 9.98 (s, 1 H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, 1242156-59-7

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; IYER, Raman Mahadevan; LAINE, Dramane Ibrahim; LOPEZ-TAPIA, Francisco Javier; PHILLIPS, Jonathan E.; STEVENSON, Christopher; WO2014/83026; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

19064-74-5, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 6-Bromophthalazine, cas is 19064-74-5,the phthalazine compound, below Introduce a new synthetic route.

A mixture of 6-bromophthalazine (0.11 g, 0.50 mmol), 6-chloro-N-methyi-N-(2,2,6,6-tetramethylpiperidin-4-yl)pyridazin-3-amine (0.16 g, 0.58 mmol), 4,4,4′,4′,5,5,5′,5′-octamethyl-2,2’bi(1 ,3,2-dioxaborolane) (0.14 g, 0.55 mmol), potassium acetate (0.15 g, 1.5 mmol) and [1, 1 ‘bis(diphenylphosphino)ferrocene]dichloropalladium(ll), complex with dichloromethane (0.04 g, 0.05mmol) in dioxane (3 ml) was heated at 80 oc for 3 h. Potassium carbonate (0.20 g, 1.5 mmol) and10 water (0.4 ml) were added and the mixture was stirred for 48 hat 90 C. After cooling, the reactionwas purified by solid phase extraction (SiliaBond Carbonate, MeOH as eluent). After evaporationof the solvent under reduced pressure, the material afforded was purified via reverse phasepreparative HPLC using 5 to 95% acetonitrile in water modified with 3% n-PrOH. LCMS: Rt = 0.43min [M+H] (LCMS method Q); 377.245; 1H NMR (400 MHz, DMSO-d6) o 9.74-9.62 (m, 2H), 8.7515 (s, 1H), 8.74 (dd, J= 8.5, 2.0 Hz, 1H), 8.23 (d, J= 8.5 Hz, 1H), 8.12 (d, J= 9.5 Hz, 1H), 7.19 (d, J=9.5 Hz, 1H), 5.19 (tt, J= 12.0, 3.5 Hz, 1H), 2.98 (s, 3H), 1.56 (dd, J= 12.0, 3.5 Hz, 2H), 1.45 (t, J=12.0 Hz, 2H), 1.27 (s, 6H), 1.10 (s, 6H).

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 19064-74-5

Reference£º
Patent; NOVARTIS AG; CHEUNG, Atwood; CHIN, Donovan Noel; DALES, Natalie; FAZAL, Aleem; HURLEY, Timothy Brian; KERRIGAN, John; O’BRIEN, Gary; SHU, Lei; SUN, Robert; SUNG, Moo; WO2014/28459; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem