The influence of catalyst in 1242156-59-7 reaction

1242156-59-7, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 1242156-59-7

1242156-59-7, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7,the phthalazine compound. Here is a downstream synthesis route of the compound 1242156-59-7

Step 2. In a 25 mL container, 1-(3-bromo-2-formylphenyl)-1H-pyrazole-3-carbonitrile (50 mg, 181 mumol, Eq: 1.00), 6-tert-butyl-8-fluorophthalazin-1(2H)-one (79.8 mg, 362 mumol, Eq: 2) and copper (I) iodide (69.0 mg, 362 mumol, Eq: 2.00) were combined with DMSO (2.00 ml) to give a yellow suspension. Sodium bicarbonate (38.0 mg, 453 mumol, Eq: 2.5) was added to it. The mixture was heated in a microwave at 120 C. for 1 hr. The reaction mixture was poured into 25 mL sat NH4Cl and extracted with EtOAc (3¡Á25 mL). The organic layers were dried over MgSO4 and concentrated in vacuo. The organic layer was concentrated and purified through ISCO flash column chromatography using ethyl acetate (containing 5% methanol) in hexanes (5% to 80% linear gradient in 15 minutes, 12 g silica gel) to give the pure desired product which was triturated with ether in hexanes and filtered to obtain 1-(3-(6-tert-butyl-8-fluoro-1-oxophthalazin-2(1H)-yl)-2-formylphenyl)-1H-pyrazole-3-carbonitrile (19 mg, 25%).

1242156-59-7, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 1242156-59-7

Reference£º
Patent; Billedeau, Roland Joseph; Kondru, Rama K.; Lopez-Tapia, Francisco Javier; Lou, Yan; Owens, Timothy D.; Qian, Yimin; So, Sung-Sau; Thakkar, Kshitij C.; Wanner, Jutta; US2012/295885; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Flexible application of 763111-47-3 in synthetic route

763111-47-3, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 763111-47-3

763111-47-3, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound, below Introduce a new synthetic route.

To a solution of compound 1.3.2a dispersed in 200 mu of acetonitrile was added HBTU (500 mug, 131 mmol) and 1.4.2 (500 mug , 137 mmol). The reaction was kept at 32 C in a shaker for 3 hours at 700 rpm. The final product was isolated by HPLC employing a C18 Atlantis T3 column (4.6 x 250 mm, 5 muiotaeta) with the following eluents: water as solvent A and acetonitrile as solvent B, going from 5 % of B to 100% of B in 15 minutes and then 100% of B from 15.01 minutes to 25 minutes. The fractions containing the radioligand were dried in vacuum, obtaining a white solid as product.

763111-47-3, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 763111-47-3

Reference£º
Patent; MEMORIAL SLOAN KETTERING CANCER CENTER; REINER, Thomas; LEWIS, Jason S.; WEBER, Wolfgang; RODRIGUEZ, Beatriz Salinas; CARNEY, Brandon; CARLUCCI, Giuseppe; (89 pag.)WO2016/33293; (2016); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

The effect of the change of 119-39-1 synthetic route on the product

119-39-1, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 119-39-1, you can also browse my other articles.

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound. An updated downstream synthesis route of 119-39-1 as follows. 119-39-1

Method A The Mitsunobu reaction was carried out under argon. Diethyl azodicarboxylate (1.03 mmol, solution in toluene c?40%) was slowly added to a stirred solution of triphenylphosphine (1.03 mmol) in dry THF (10mL) at the temperature between -10C and -5C. Then a solution of phthalazinone 2 (0.684 mmol) in THF (10 mL) was added dropwise. The whole lot was mixed for 15 min at this temperature and next the appropriate alcohol (0.753 mmol) in THF (5 mL) was added at -10 to -5C. The mixture was stirred during 2 h at this conditions, after, which time the reaction mixture was warmed to ambient temperature and stirred in this conditions for 24h. All volatile materials were removed under reduced pressure, ethyl ether (5 mL) was added to the residue, and the whole lot was stirred for 0.5 h at an ambient temperature. The separate white solid was collected by flirtation and washed with ether, and the filtrate was evaporated to dryness. The product was separated and purified by flash chromatography. Method B The Mitsunobu reaction was carried out under argon. To a round bottom flask were added phthalazinone 2 or 3 (1.78 mmol), alcohol (2.67 mmol), triphenylphosphine (2.67 mmol) and THF (40 mL). Then, the solution was cooled to the temperature -20C for 15 min and diethyl azodicarboxylate (2.67mmol, solution in toluene c?40%) was added dropwise to the solution. The reaction was stirred at -20C for 1h, and then the cold bath allowed to slowly warm to an ambient temperature and stirred in this conditions for 24h. All volatile materials were removed under reduced pressure, diethyl ether (15 mL) was added to the residue, and the whole lot was stirred for 0.5 h at an ambient temperature. The separate white solid was collected by flirtation and washed with ether, and the filtrate was evaporated to dryness. The product was separated and purified by flash chromatography. 2-(Butan-2-yl)phthalazin-1(2H)-one (10a) Straw oil; Yield: 41.5 mg, 30% (Method A), 259 mg, 72% (Method B); Rf (AcOEt/Hex 1:3)=0.5; FTIR (thin film): nu=3044, 2968, 2933, 1644 (C=O), 1591 cm-1; 1H NMR (600 MHz, CDCl3): delta=8.43 (d, J=7.8 Hz, 1H, 8 Ar-H), 8.20 (s, 1H, 4-pyrid), 7.80-7.71 (m, 2H, Ar-H), 7.67 (d, J=8.2 Hz, 1H, 5 Ar-H), 5.38-5.06 (m, 1H, N-CH), 1.95-1.86 (m, 1H, CH2), 1.77-1.68 (m, 1H, CH2), 1.37 (d, J=6.8 Hz, 3H, Me), 0.84 (t, J=7.4 Hz, 3H, Me); 13C NMR (150 MHz, CDCl3): delta=159.6 (C=O), 137.7, 133.0, 131.5, 129.4, 128.0, 127.1, 125.9, 54.1 (N-CH), 28.4, 19.4, 10.9 ppm; HRMS (ESI) m/z: calcd for C12H15N2O [M+H]+ 203.1179, found 203.1179.

119-39-1, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 119-39-1, you can also browse my other articles.

Reference£º
Article; Malinowski, Zbigniew; Fornal, Emilia; Sieroci?ska, Beata; Czeczko, Renata; Nowak, Monika; Tetrahedron; vol. 72; 49; (2016); p. 7942 – 7951;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Discovery of 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one

The chemical industry reduces the impact on the environment during synthesis,763111-47-3,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one,I believe this compound will play a more active role in future production and life.

One of the major reasons is to use measurements of the macroscopic properties of a system, 763111-47-3, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound, introduce a new downstream synthesis route.

General procedure: Intermediates 8 (1 eq) and respective 9-chloroacridine derivatives 4a-4f (1.1 eq) were added to a round flask, and then excessphenol was added as solvent. The reaction system was warmed up to 60 C until phenol was melted and stirred for 0.5 h under argonprotection. Then the mixture was warmed up to 120 C and continued to reaction for more 2 h. After the reaction was completed, themixture was added to ethyl ether drop by drop [2]. The precipitate was filtered and washed twice with new ethyl ether to give pureproducts 9a-9f, which were then characterized by 1H NMR, 13C NMR, melting point and high resolution mass spectrum (HRMS, ESI).

The chemical industry reduces the impact on the environment during synthesis,763111-47-3,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Dai, Qiuzi; Chen, Jiwei; Gao, Chunmei; Sun, Qinsheng; Yuan, Zigao; Jiang, Yuyang; Chinese Chemical Letters; vol. 31; 2; (2020); p. 404 – 408;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Fun Route: New Discovery of 119-39-1

119-39-1, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 119-39-1, you can also browse my other articles.

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound. 119-39-1. Here is a downstream synthesis route of the compound 119-39-1

The reaction was carried out in a round-bottom flask fitted with a magnetic stirrer bar. To a suspension of phthalazin-1(2H)-one (2) or 2-methylphthalazin-1(2H)-one (5) or pyridopyridazinone 8 (6.84mmol) in water (55mL) (Method A) or in the acetate buffer solution pH=5.8 (55mL) (Method B), was added potassium bromide (8.44mmol) and bromine (8.44mmol) at an ambient temperature. The mixture was then stirred for 6h at an ambient temperature, and next the whole was heated to boiling and stirred for 25h until the bromine colour entirely disappeared. After cooling to an ambient temperature (in the case of 9 the mixture was adjusted to pH 7 with saturated NaHCO3) the separated solid was collected by filtration and washed with water (5mL). The crude product was purified by flash chromatography. 4.4.1 4-Bromophthalazin-1(2H)-one (3) (Path A) White solid; Yield: 693 mg, 45% (Method A), 1.02 g, 66% (Method B); Mp: 279-281 C, (lit. 277-279 C;273 C ); Rf (DCM/AcOEt/Hex 6:1:1)=0.24; FTIR (KBr): nu=3022, 2931, 2892, 1671, 1659 (C=O), 1581 cm-1; 1H NMR (600 MHz, DMSO-d6): delta=12.94 (s, 1H, NH), 8.26 (d, J=7.9 Hz, 1H, 8 Ar-H), 8.06-8.01 (m, 1H, Ar-H), 7.97-7.91 (m, 2H, Ar-H); 13C NMR (150 MHz, DMSO-d6): delta=159.1 (C=O), 134.8, 133.1, 129.9, 129.4, 128.2, 127.6, 126.5 ppm; HRMS (ESI) m/z: calcd for C8H6BrN2O [M+H]+ 224.9658, found 224.9658.

119-39-1, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 119-39-1, you can also browse my other articles.

Reference£º
Article; Malinowski, Zbigniew; Fornal, Emilia; Sieroci?ska, Beata; Czeczko, Renata; Nowak, Monika; Tetrahedron; vol. 72; 49; (2016); p. 7942 – 7951;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Flexible application of 119-39-1 in synthetic route

119-39-1, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 119-39-1

119-39-1, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound, below Introduce a new synthetic route.

Example 1. 2-(4-Bromobutyl)-1(2H)-phthalazinone . Small portions (2.5 g, 60 mmol) of a dispersion of 60% NaH in mineral oil were added over a solution of 1(2H)-phthalazinone (7.3 g, 50 mmol) in dimethylformamide (100 mL) cooled to 0C. The reaction mixture was left to reach room temperature and kept stirred for an hour. 1,4-dibromobutane (18 mL, 150 mmol) was then added at a time and the reaction mixture was stirred, at room temperature, for 4 hours. The reaction mixture was poured over cnished ice, extracted with ethyl ether (twice), and the organic extracts were dried over anhydrous Na2SO4and concentrated to dryness. The excess dibromobutane was eliminated by distillation and the obtained residue was purified by flash chromatography (CH2Cl2), yielding an oil (11.6 g, yield: 83%) identified on the basis of its spectroscopic data as the title product

119-39-1, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 119-39-1

Reference£º
Patent; FABRICA ESPANOLA DE PRODUCTOS, QUIMICOS Y FARMACEUTICOS, S.A. (FAES); EP875512; (1998); A2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

The effect of the change of 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one synthetic route on the product

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, 763111-47-3

A balanced equation for a chemical reaction indicates what is reacting and what is produced, 763111-47-3, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound. An updated downstream synthesis route of 763111-47-3 as follows.

General procedure: Compound 4 (400 mg, 1.09 mmol, 1 eq) was dissolved in acetonitrile(10 ml), and then 5a-c (1 eq) and DIEA (2 eq) were added.The mixture was stirred at room temperature for 2 h, and then theprecipitate was filtered, washed with water, acetonitrile and ethylether, and dried to give products 6a-c.4.1.2.1. Methyl (E)-3-(4-((4-(2-fluoro-5-((4-oxo-3,4-dihydrophthalazin-1-yl)methyl) benzoyl)piperazin-1-yl)methyl)phenyl)acrylate(6a). White powder; yield 64%; mp 160-162 C; 1H NMR(400 MHz, DMSO-d6) d 12.60 (s, 1H), 8.26 (dd, J = 7.7, 1.5 Hz, 1H),7.96 (d, J = 7.7 Hz, 1H), 7.91-7.85 (m, 1H), 7.85-7.78 (m, 1H),7.72-7.60 (m, 3H), 7.46-7.40 (m, 1H), 7.36 (d, J = 8.0 Hz, 2H),7.31 (dd, J = 6.5, 2.3 Hz, 1H), 7.26-7.17 (m, 1H), 6.63 (d,J = 16.1 Hz, 1H), 4.32 (s, 2H), 3.73 (s, 3H), 3.67-3.56 (m, 2H), 3.51(s, 2H), 3.23-3.10 (m, 2H), 2.45-2.34 (m, 2H), 2.32-2.18 (m, 2H).19F NMR (376 MHz, DMSO-d6) d-119.83. 13C NMR (101 MHz,DMSO-d6) d 166.6, 163.63, 159.2, 156.2 (d, J = 245.4 Hz), 144.7,144.2, 140.4, 134.7 (d, J = 3.2 Hz), 133.3, 132.8, 131.4,, 129.2,129.0, 128.6 (d, J = 3.9 Hz), 128.2, 127.8, 126.0, 125.3, 123.7 (d,J = 18.3 Hz), 117.4, 115.9, 115.7, 61.2, 52.6, 52.0, 51.3, 46.5, 41.3,36.3. HRMS (ESI) m/z calculated for [M+H]+ 541.2251, found541.2227.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, 763111-47-3

Reference£º
Article; Yuan, Zigao; Chen, Shaopeng; Sun, Qinsheng; Wang, Ning; Li, Dan; Miao, Shuangshuang; Gao, Chunmei; Chen, Yuzong; Tan, Chunyan; Jiang, Yuyang; Bioorganic and Medicinal Chemistry; vol. 25; 15; (2017); p. 4100 – 4109;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Analyzing the synthesis route of Phthalazin-1(2H)-one

119-39-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,119-39-1 ,Phthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

In the next few decades, the world population will flourish. 119-39-1.As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

Weigh 0.324g of commercial compound C1a dissolved in 3ml DMF,60% NaH 0.16g was added under ice bath.Stir for 30 minutes and add 0.591 g of ethyl 4-(bromomethyl)benzoate.Stir for 1 hour at room temperature. Pour the reaction mixture into 100ml of crushed ice.Extract several times with ethyl acetate, combine the organic layers, and evaporate.Light yellow solid (Intermediate C1b).Dissolve this intermediate in 10 ml of THF and add 2.9 ml of 8N NaOH.Return overnight. The reaction solution was diluted with water, and the aqueous layer was washed with ethyl acetate.The aqueous layer was adjusted to pH 6 with 6N HCl, precipitated and filtered.The precipitate is washed with water and dried to give a beige product C1c

119-39-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,119-39-1 ,Phthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Chinese Academy Of Sciences Shanghai Pharmaceutical Institute; Shen Jingkang; Xiong Bing; Zhao Lele; Li Jia; Geng Meiyu; Ma Lanping; Chen Danqi; Su Mingbo; Zhou Yubo; Hu Xiaobei; Liu Hongchun; Shen Aijun; (54 pag.)CN107879975; (2018); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Research on new synthetic routes about 72702-95-5

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2-(3-(4-Bromo-2-fluorobenzyl)-4-oxo-3,4-dihydrophthalazin-1-yl)acetic acid, 72702-95-5

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. 72702-95-5, If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.2-(3-(4-Bromo-2-fluorobenzyl)-4-oxo-3,4-dihydrophthalazin-1-yl)acetic acid, cas is 72702-95-5,the phthalazine compound. A new synthetic method of this compound is introduced below.

EXAMPLE 54 Acetyl chloride (10 ml.) was added to stirred methanol (150 ml.) to give a solution of hydrogen chloride in methanol and methyl acetate. 2-(2-Fluoro-4-bromobenzyl)-1,2-dihydro-1-oxophthalazin-4-ylacetic acid (2.1 g.) was added to this solution and the mixture was heated under reflux for 18 hours, and then cooled to room temperature. The solid which crystallized out was separated by filtration and recrystallized from methanol to give methyl 2-(2-fluoro-4-bromobenzyl)-1,2-dihydro-1-oxophthalazin-4-ylacetate (1.4 g.), m.p. 151-153 C.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 2-(3-(4-Bromo-2-fluorobenzyl)-4-oxo-3,4-dihydrophthalazin-1-yl)acetic acid, 72702-95-5

Reference£º
Patent; Imperial Chemical Industries Limited; US4251528; (1981); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Application of 1-(2-Chloroethyl)-2-imidazolidinone

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 119-39-1

119-39-1, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound, below Introduce a new synthetic route.

EXAMPLE 7B Preparation of Hydralazine Base Using Isopropanol A 500 mL, 3-necked, round-bottom flask fitted with a temperature probe and condenser was charged with 45 mL of hydrazine hydrate and 25 mL of isopropanol; the solution was cooled to 0 to 5 C. About 9 g of 1-chlorophthalazine salt were added in portions at a rate to maintain the solution temperature at 0 to 5 degrees. The solution was stirred at 20 to 25 C. for about 24 hrs. The reaction mixture was then cooled to 0 to 5 C. and stirred for 3 hrs. The resulting solid material was filtered from the solution, washed with 15 mL of cold isopropanol, and dried under vacuum at 35 C. Yield 86%.

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 119-39-1

Reference£º
Patent; Navinta LLC; US2007/129546; (2007); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem