Month: March 2021

A balanced equation for a chemical reaction indicates what is reacting and what is produced, 253-52-1, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.Phthalazine, cas is 253-52-1,the phthalazine compound. An updated downstream synthesis route of 253-52-1 as follows.

General procedure: Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Phthalazine, 253-52-1

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Phthalazine, cas is 253-52-1,the phthalazine compound. 253-52-1. Here is a downstream synthesis route of the compound 253-52-1

Phthalazinium dicyanomethanide was synthesized by adding phthalazine or phthalazine derivative (14.58 mmol) to a solution of TCNEO (4.86 mmol) in THF (50 mL) at 0 ¡ãC. The reaction was stirred at this temperature for 2 h. Then, the formed solid was isolated by filtration and washed with cold THF (3 * 25 mL) to give the product in nearly quantitative yield.

253-52-1, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 253-52-1, you can also browse my other articles.

Reference£º
Article; Wang, Bo; Liu, Honglei; Wang, Qijun; Yuan, Chunhao; Jia, Hao; Liu, Chunxiao; Guo, Hongchao; Tetrahedron; vol. 73; 40; (2017); p. 5926 – 5931;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

253-52-1, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. Phthalazine, cas is 253-52-1,the phthalazine compound, below Introduce a new synthetic route.

General procedure: Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol.

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 253-52-1

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

1021298-68-9, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. 2-Fluoro-5-((4-oxo-3,4-dihydrophthalazin-1-yl)methyl)benzonitrile, cas is 1021298-68-9,the phthalazine compound, below Introduce a new synthetic route.

(c) 2-Fluoro-5-[(4-oxo-3,4-dihydrophthalazin-1-yl)methyl]benzoic acid (D) 2-Fluoro-5-[(4-oxo-3,4-dihydrophthalazin-1-yl)methyl]benzonitrile (ED) (9.60 g, 34.37 mmol) and water (40 ml) were stirred at 200C. 2M Sodium hydroxide (36 ml, 72.00 mmol) was added, the reaction mixture warmed to 9O0C and held at this temperature overnight. The reaction mixture was cooled to room temperature and filtered. The filter pad was washed with water (10 ml) and the combined filtrate added to 2M HCI (56 ml, 112.00 mmol) at 600C over 40 minutes. The resulting suspension was cooled to 50C and filtered, washed with water (57 ml) and dried in vacuo at up to 6O0C to give the title compound as a white solid (9.72 g).Mass Spectrum: MH+ 2991 H NMR (400MHz. DMSO-d6) delta: 4.36 (s, 2H), 7.24 (dd, 1 H), 7.59 (m, 1 H), 7.84 (dt, 2H), 7.90(dt, 1 H), 7.98 (d, 1 H), 8.27 (dd, 1 H), 12.59 (s, 1 H), 13.22 (br s, 1 H).

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 1021298-68-9

Reference£º
Patent; KUDOS PHARMACEUTICALS LIMITED; WO2008/47082; (2008); A2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound, introduce a new downstream synthesis route. 119-39-1

1b) 1-Chlorophthalazine hydrochloride A suspension of 50 g (342 mmol) phthalazone, 1370 ml acetonitrile, 66 ml (0.72 mol) POCl3 and 85 ml 4 N HCl in dioxane is stirred for 8 h at 50 C. The resulting solution is cooled to RT, evaporated to a volume of about 0.8 l and diluted with 1.2 l DIPE. Filtration and washing with DIPE yield the title compound: FAB-MS (M+H)+=165/167.

119-39-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,119-39-1 ,Phthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Bold, Guido; Dawson King, Janet; Frei, Jorg; Heng, Richard; Manley, Paul William; Wietfeld, Bernhard; Wood, Jeanette Marjorie; US2003/13718; (2003); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

In the next few decades, the world population will flourish. 763111-47-3.As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

To the reaction kettle was added 6 L of dichloromethane,4- (4-fluoro-3- (piperazine-1-carbonyl) benzyl) phthalazin-1 (2-hydro) -one (400 g, 1.09 mol)Cooled to 0 C,Triethylamine (153 g, 210 mL, 1.51 mol) was slowly added,Cyclopropanecarbonyl chloride (130 g, 1.24 mol)Stir at room temperature,After TLC detection reaction,Add 3L of water,2L dichloromethane,Dispensing,The organic phase was removed by distillation under reduced pressure,To obtain 320 g of a yellow solid;HPLC purity 96.13%Yield 67.5%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, 763111-47-3

Reference£º
Patent; Sichuan Kelun Drug Research Institute Co., Ltd.; Li, Hongming; Wu, Wei; Tuo, Shichuan; Wang, Lichun; Wang, Jingyi; (8 pag.)CN105985294; (2016); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. 89898-86-2, If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.5-Nitrophthalazine, cas is 89898-86-2,the phthalazine compound. A new synthetic method of this compound is introduced below.

(C) Phthalazine-5,8-dione precursors (Y1 and Y4=C, Y2 and Y3=N) used in the process of the present invention were prepared according to the following reaction scheme 4. The detailed procedure is described in (i) J. Med. Chem., 48, 744-752, and (ii) Bioorganic and Medical Chemistry Letters, 27, 2577-2580.

89898-86-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,89898-86-2 ,5-Nitrophthalazine, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Gerogetown University; Brown, Milton L.; Paige, Mikell; Torestsky, Jeffrey A.; Uren, Aykut; Kosturko, George; Bulut, Gullay; (58 pag.)US9522908; (2016); B2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, 1242156-59-7, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7,the phthalazine compound, introduce a new downstream synthesis route.

In a 1 L round-bottomed flask, 6-tert-butyl-8-fluorophthalazin-1(2H)-one (5.6 g, 25.4 mmol, Eq: 1.00) was combined with THF (300 ml) to give a colorless solution. Sodium hydride (1.12 g, 28.0 mmol, Eq: 1.1) was added. The reaction mixture was stirred at ambient temperature for 10 min 2-Fluoro-4-iodonicotinaldehyde (7.02 g, 28.0 mmol, Eq: 1.1) was added and the reaction mixture was stirred at ambient temperature for 1 h. The reaction was complete as determined by LCMS analysis. The reaction mixture was quenched with saturated NH4Cl. The reaction mixture was poured into 200 mL H2O and extracted 3X with CH2Cl2. The organic layers were washed with brine, then dried over Na2SO4 and concentrated in vacuo. The resultant bright yellow solid was transferred into a filter funnel and the flask washed twice with a small volume of EtOAc to ensure complete transfer of the solid into the funnel. The liquid was filtered through. The solid was triturated twice with Et2O and dried under vacuum to afford the desired product as a cream-colored solid (8.09 g, 17.9 mmol, 70.5 % yield). (M+H) = 452 m/e. H NMR (400 MHz, CHLOROFORM-d) delta ppm 1.44 (s, 9 H) 7.49 – 7.54 (m, 1 H) 7.54 (d, J=1.77 Hz, 1 H) 8.03 (d, J=5.31 Hz, 1 H) 8.30 (d, J=2.53 Hz, 1 H) 8.37 (d, J=5.31 Hz, 1 H) 9.98 (s, 1 H).

1242156-59-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1242156-59-7 ,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; BROTHERTON-PLEISS, Christine; JAIME-FIGUEROA, Saul; LOPEZ-TAPIA, Francisco Javier; LOU, Yan; OWENS, Timothy D.; WO2013/24078; (2013); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

119-39-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

261.3 mg of acetic anhydride copper (II) and Molecular Sieve 4A (79.1 mg) were added to 80.7 mg of the resin obtained in Process 4. 400.0 mg of 1(2H)-phthalazinone and 984 mul of diisopropylethylamine in a solution of NMP (4 ml) were further added therein and stirred at 50C for 23 hours. After removing the reaction solution, the resin was washed with DMF, water, ethanol and DCM three times each and dried under reduced pressure.

119-39-1. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.119-39-1, if you are interested, you can browse my other articles.

Reference£º
Patent; Ajinomoto Co., Inc.; EP1454898; (2004); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

119-39-1, We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. Phthalazin-1(2H)-one, cas is 119-39-1,the phthalazine compound, below Introduce a new synthetic route.

1-(2H)-pyridazinone 1.00 g (6.84 mmol) and triphenylphosphine 1.79 g (6.84 mmol) were added to 25 ml of tetrahydrofuran, and 0.85 g (6.84 mmol) of 2-bromoethanol was added dropwise in an ice bath.After the dropwise addition was completed, 1.22 g (7.00 mmol) of diethyl azodicarboxylate was added dropwise to the ice bath.After stirring for 1 hour in an ice bath, the reaction was carried out at room temperature until TLC followed the progress of the reaction.The solvent was evaporated under reduced pressure. EtOAc EtOAc m.The product was obtained as a reddish brown solid, 1.01 g, yield 58%.

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase., 119-39-1

Reference£º
Patent; East China University of Science and Technology; Xu Xiaoyong; Li Zhong; Chen Xiulei; Li Wei; Jia Haowu; Cao Xiaofeng; Shao Xusheng; Xu Zhiping; (70 pag.)CN108276352; (2018); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem