Category: 119-39-1

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.119-39-1,Phthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

EXAMPLE 6 Preparation of 1-Chlorophthalazine Hydrochloride A 3-neck 2 L round-bottomed flask was charged with 584 mL of phosphorous oxychloride (306 g, 2 mol. eq.) and cooled to about 0 to 5 C. To this was added 73 g of powdered phthalazinone (0.5 mol eq.). The reaction mass appeared as a suspension and was heated to about 60 C. with stirring. The progress of the reaction was monitored by HPLC. While the reaction mixture was maintained at approximately 50 C., about 65% of the phosphorous oxychloride was distilled out under vacuum. The concentrated reaction mixture was cooled to room temperature, about 375 mL of ethyl acetate was added, and then the mixture was purged with HCl gas for about 30 min.; thereafter, the mixture was cooled to a temperature of 0 to 5 C. and stirred for about one hour. The resulting pale yellow material was filtered and washed with 150 mL of cold ethyl acetate. The isolated material was 1-chlorophthalazine hydrochloride, which was dried under vacuum for about 3 hrs at 30 C. Yield=65%; purity=99%;, 119-39-1

119-39-1 Phthalazin-1(2H)-one 8394, aphthalazine compound, is more and more widely used in various fields.

Reference£º
Patent; Navinta LLC; US2007/129546; (2007); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

A common heterocyclic compound, the phthalazine compound, name is Phthalazin-1(2H)-one,cas is 119-39-1, mainly used in chemical industry, its synthesis route is as follows.,119-39-1

261.3 mg of acetic anhydride copper (II) and Molecular Sieve 4A (79.1 mg) were added to 80.7 mg of the resin obtained in Process 4. 400.0 mg of 1(2H)-phthalazinone and 984 mul of diisopropylethylamine in a solution of NMP (4 ml) were further added therein and stirred at 50C for 23 hours. After removing the reaction solution, the resin was washed with DMF, water, ethanol and DCM three times each and dried under reduced pressure.

As the rapid development of chemical substances, we look forward to future research findings about 119-39-1

Reference£º
Patent; Ajinomoto Co., Inc.; EP1454898; (2004); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

119-39-1, Phthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a round bottom flask containing DMF (30 mL) under an atmosphere of nitrogen was added, phthalazone (500 mg, 3.42 mmol), anhydrous potassium carbonate (708 mg, 5.12 mmol) and allyl bromide (442 pL, 5.12 mmol). The reaction was stirred overnight at room temperature before the solvent was removed in vacuo and the crude material purified directly via flash column chromatography using n -pentane: EtOAc (3:1) affording 2-allylphthalazin- 1 (2/7)-onc as a brown oil (222 mg, 1.20 mmol, 35%) NMR (400 MHz, CDCb) d = 8.42 (ddd, J = 7.5, 1.7, 0.7 Hz, 1H), 8.17 (d, J = 0.8 Hz, 1H), 7.83 – 7.72 (m, 2H), 7.71 – 7.67 (m, 1H), 6.04 (ddt, / = 17.2, 10.3, 5.9 Hz, 1H), 5.30 – 5.22 (m, 2H), 4.85 (dt, J = 5.9, 1.5 Hz, 2H); 13C NMR (100 MHz, CDCb) d = 159.2, 138.1, 133.1, 132.5, 131.7, 129.7, 128.0, 126.8, 126.0, 118.0, 53.5. Data is in accordance with literature values (Nezhawy, A.O.H., Gaballah, S.T. & Radwan, M.A.A. Studying the reactivity of (phthalazin-l(2H)-on-2-yl)methyl trichloroacetimidate towards different C- and O-nucleophiles. Tetrahedron Letters 50, 6646-6650, 2009)., 119-39-1

119-39-1 Phthalazin-1(2H)-one 8394, aphthalazine compound, is more and more widely used in various fields.

Reference£º
Patent; OXFORD UNIVERSITY INNOVATION LIMITED; GOUVERNEUR, Veronique; CORNELISSEN, Bart; WILSON, Thomas Charles; (152 pag.)WO2019/186135; (2019); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong phthalazine compound,Phthalazin-1(2H)-one,119-39-1,Molecular formula: C8H6N2O,mainly used in chemical industry, its synthesis route is as follows.,119-39-1

A. Conventional Preparation of 1-Chlorophthalazine. One mole equivalent (10 g) of 1(2H)-phthalazinone and 7.7 mole equivalents (82.5 g, 50.1 mL) of phosphorus oxychloride were charged into a 100-mL, 3-necked flask fitted with a temperature probe and condenser. The slurry was stirred and heated to 70 C., and then the heat source was removed. The mixture was allowed to cool to room temperature, and then was poured in portions over 500 g of ice. After the initial addition of the reaction mixture, a violent exotherm was observed, and a portion of the solution spilled over the sides of the container. Ice quenching was completed with extreme caution but without further incident. Alternative workups were also examined. As a first alternative, after the reaction mixture reached room temperature, it was concentrated by heating at 45 C. under vacuum. The resulting yellow slurry was added in portions to 3 volumes of cold, deionized water. Once again, control of exothermic reactions that occurred during this quenching step was difficult. As a second alternative, after the reaction mixture reached room temperature, it was concentrated by heating at 45 C. under vacuum. To the resulting oily yellow paste was added 5 volumes of toluene, and the resulting biphasic solution was concentrated by heating at 45 C. under vacuum to remove the phosphorus oxychloridettoluene azeotrope. The process was repeated a second time. The resulting yellow paste solidified into an unworkable solid that was discarded. As a third alternative, after the reaction mixture reached room temperature, it was concentrated by heating at 45 C. under vacuum. To the resulting oily yellow paste was added 2 volumes of toluene, and the resulting biphasic solution was concentrated by heating at 45 C. under vacuum to remove the phosphorus oxychloride/toluene azeotrope. The process was repeated a second time, and then 2 volumes of tetrahydrofuran were added. The resulting slurry was stirred and cooled to 0 C. and then was filtered to isolate a light yellow solid. The filtrate was treated as described in the following paragraph. The aqueous mixture was rendered basic by the addition of 5 N sodium hydroxide solution. A light yellow precipitate formed. The solid was isolated by extraction into dichloromethane and concentration of the resulting extracts to dryness. A moist cake of 1-chlorophthalazine was thus obtained in yields that ranged from 80% to 440% of theoretical. If the moist cake was allowed to dry, or if this material was not used immediately, it darkened and underwent degradation to a mixture of the desired product, 1-chlorophthalazine, and multiple by-products. To prevent this loss and contamination, freshly obtained, moist chloro compound was used immediately.

With the synthetic route has been constantly updated, we look forward to future research findings about Phthalazin-1(2H)-one,belong phthalazine compound

Reference£º
Patent; Nelson, Deanna J.; US2005/137397; (2005); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

119-39-1, Phthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1b) 1-Chlorophthalazine hydrochloride A suspension of 50 g (342 mmol) phthalazone, 1370 ml acetonitrile, 66 ml (0.72 mol) POCl3 and 85 ml 4 N HCl in dioxane is stirred for 8 h at 50 C. The resulting solution is cooled to RT, evaporated to a volume of about 0.8 l and diluted with 1.2 l DIPE. Filtration and washing with DIPE yield the title compound: FAB-MS (M+H)+=165/167., 119-39-1

As the paragraph descriping shows that 119-39-1 is playing an increasingly important role.

Reference£º
Patent; Bold, Guido; Dawson King, Janet; Frei, Jorg; Heng, Richard; Manley, Paul William; Wietfeld, Bernhard; Wood, Jeanette Marjorie; US2003/13718; (2003); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.119-39-1,Phthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

General procedure: Anhydrous potassium carbonate (0.009 mol) was added to appropriate 1(2H)-phthalazinone derivative (0.003 mol) in 7 mL of anhydrous DMF. Subsequently, 1-bromo-2-chloroethane (0.009 mol) was added to this solution and reaction mixture was stirred at room temperature for 2.5 h. Then, the reaction mixture was poured into ice water and the precipitate was filtered to yield compound (4, 5 and 6), which was used for the next step without further purification. 2-(2-Chloroethyl)phthalazin-1(2H)-one (4). White solid, mp 98-101C, ESI-HRMS m/z: Calcd. for C10H10ClN2O (MH+), 209.0482, found 209.0472., 119-39-1

The synthetic route of 119-39-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Kilic, Burcu; Guelcan, Hayrettin Ozan; Yalcin, Mertcan; Aksakal, Fatma; Dimoglo, Anatoli; ?ahin, Mustafa Fethi; Do?ruer, Deniz Songuel; Letters in drug design and discovery; vol. 14; 2; (2017); p. 159 – 166;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

The phthalazine compound, name is Phthalazin-1(2H)-one,cas is 119-39-1, mainly used in chemical industry, its synthesis route is as follows.,119-39-1

1b) 1-Chlorophthalazine hydrochloride A suspension of 50 g (342 mmol) phthalazone, 1370 ml acetonitrile, 66 ml (0.72 mol) POCl3 and 85 ml 4 N HCl in dioxane is stirred for 8 h at 50 C. The resulting solution is cooled to RT, evaporated to a volume of about 0.8 l and diluted with 1.2 l DIPE. Filtration and washing with DIPE yield the title compound: FAB-MS (M+H)+=165/167.

As the rapid development of chemical substances, we look forward to future research findings about 119-39-1

Reference£º
Patent; Bold, Guido; Dawson King, Janet; Frei, Jorg; Heng, Richard; Manley, Paul William; Wietfeld, Bernhard; Wood, Jeanette Marjorie; US2003/13718; (2003); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Name is Phthalazin-1(2H)-one, as a common heterocyclic compound, it belongs to phthalazine compound, and cas is 119-39-1, its synthesis route is as follows.,119-39-1

Stage A 2-{2-[(Tetrahydro-2-pyranyl)oxy]ethyl}-1-oxophthalazine A solution of 41.5 g of potassium hydroxide in 53 ml of water is added at room temperature to a solution of 61 g of 1-oxophthalazine in 430 ml of dimethyl sulfoxide. After 30 minutes, 130 g of tetrahydro-2-pyranyl 2-bromoethyl ether are added to the suspension obtained. The mixture is left stirring for 30 hours at room temperature and then concentrated, the residue is taken up in 400 ml of water and the product is extracted with dichloromethane. The organic phase is concentrated. Yield: 80% Proton nuclear magnetic resonance spectrum (400 MHz, solvent CDCl3): 1.3 to 2 ppm,m,6H; 3.3 to 4.8 ppm,m+m, 1H+6H; 7.6 to 7.9 ppm,m,3H; 8.15 ppm,s,1H; 8.4 ppm,m,1H

With the complex challenges of chemical substances, we look forward to future research findings about Phthalazin-1(2H)-one

Reference£º
Patent; Adir et Compagnie; US5077288; (1991); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

119-39-1, Phthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[0322] General procedure: To a mixture ofphthalazone in anhydrous DMF (270mL), NaOEt (21% w/w solution in EtOH, 51 mL, 137 mmol) was added. After 15 min,propargyl bromide (80% solution in toluene, 14.8 mL, 20.4 g, 137 mmol) was added and thereaction mixture was stirred at r.t. for 2 days. After evaporation, the residue was stirred withhot H20 (3 L), cooled down and the product was filtered (51%).

119-39-1, The synthetic route of 119-39-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; FOKIN, Valery; SHARPLESS, Barray, K.; ECKMANN, Lars; MIYAMOTO, Yukiko; WO2014/205414; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.119-39-1,Phthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

STAGE A 1,2-Dihydro-1-oxo-2-(tetrahydropyran-2-ylethoxy)-phthalazine A solution of 41.5 g of potassium hydroxide in 53 ml of water is added to a solution of 61 g of 1,2-dihydro-1-oxophthalazine in 430 ml of dimethyl sulfoxide. After one hour, 130 g of 2-(2-bromoethoxy)tetrahydropyran are added rapidly and the mixture is left stirring at 20 C. for 48 hours. The solution obtained is then diluted with 1200 ml of water, the product is extracted with dichloromethane and the organic phase is dried over anhydrous sodium sulfate and concentrated. Yield: 80% Proton nuclear magnetic resonance spectrum (200 MHz, solvent CDCl3): 1.3-2 ppm, m, 6H; 3.3-4.8 ppm, m+m, 1H+6H; 7.6-7.9 ppm, m, 3H; 8.15 ppm, s, 1H; 8.4 ppm, m, 1H., 119-39-1

The synthetic route of 119-39-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Adir et Compagnie; US5028607; (1991); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem