1242156-59-7 | Page 3 of 10 | Heterocyclic Building Blocks-phthalazine

The effect of 1242156-59-7 reaction temperature change on equilibrium

Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.1242156-59-7, if you are interested, you can browse my other articles.

A heterogeneous catalyst is a catalyst that is present in a different phase than the reactants. Such catalysts generally function by furnishing an active surface upon which a reaction can occur. 1242156-59-7, name is 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, introduce a new downstream synthesis route as follows. 1242156-59-7

To a suspension of NaH (60%, 473 mg, 1 1.8 mmol) in DMF (5 mL) was added a solution of 6- tert-butyl-8-fluoro-2H-phthalazin-l-one (which may be prepared as described in Berthel, S. et al. US 20100222325 Column 139; 1.3 g, 5.91 mmol) at 0 C. The mixture was stirred for 5 min at 0 C and heated at 70 C for 30 min under nitrogen. The mixture was cooled to room temperature, a solution of 4-bromo-l-bromomethyl-2-fluoro-benzene (1.74 g, 6.5 mmol) in DMF (3 mL) was added and the mixture was stirred for 1.5 h at room temperature. Cold water (5 mL) was added. The mixture was extracted with EtOAc and the organic extract was dried (Na2S04), and evaporated. The residue was purified by chromatography (silica gel, 20% EtOAc/hexane) to give 2-(4-bromo-2-fluoro-benzyl)-6-tert-butyl-8-fluoro-2H-phthalazin-l-one (1.0 g, 41%) as a yellow solid. MS calcd. for Ci9Hi8BrF2N20 [(M+H)+] 407, obsd. 407.2.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; DOMINIQUE, Romyr; LOPEZ-TAPIA, Francisco Javier; MERTZ, Eric; SO, Sung-Sau; WO2014/76104; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

The influence of catalyst in 1242156-59-7 reaction

1242156-59-7, There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about 1242156-59-7

1242156-59-7, An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7,the phthalazine compound. Here is a downstream synthesis route of the compound 1242156-59-7

Step 2. In a 25 mL container, 1-(3-bromo-2-formylphenyl)-1H-pyrazole-3-carbonitrile (50 mg, 181 mumol, Eq: 1.00), 6-tert-butyl-8-fluorophthalazin-1(2H)-one (79.8 mg, 362 mumol, Eq: 2) and copper (I) iodide (69.0 mg, 362 mumol, Eq: 2.00) were combined with DMSO (2.00 ml) to give a yellow suspension. Sodium bicarbonate (38.0 mg, 453 mumol, Eq: 2.5) was added to it. The mixture was heated in a microwave at 120 C. for 1 hr. The reaction mixture was poured into 25 mL sat NH4Cl and extracted with EtOAc (3¡Á25 mL). The organic layers were dried over MgSO4 and concentrated in vacuo. The organic layer was concentrated and purified through ISCO flash column chromatography using ethyl acetate (containing 5% methanol) in hexanes (5% to 80% linear gradient in 15 minutes, 12 g silica gel) to give the pure desired product which was triturated with ether in hexanes and filtered to obtain 1-(3-(6-tert-butyl-8-fluoro-1-oxophthalazin-2(1H)-yl)-2-formylphenyl)-1H-pyrazole-3-carbonitrile (19 mg, 25%).

Reference£º
Patent; Billedeau, Roland Joseph; Kondru, Rama K.; Lopez-Tapia, Francisco Javier; Lou, Yan; Owens, Timothy D.; Qian, Yimin; So, Sung-Sau; Thakkar, Kshitij C.; Wanner, Jutta; US2012/295885; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Derivation of elementary reaction about 1242156-59-7

1242156-59-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,1242156-59-7 ,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7,the phthalazine compound. A new synthetic method of this compound is introduced below. 1242156-59-7

In a 50 mL round-bottomed flask, 2-chloro-4-iodonicotinaldehyde (389 mg, 1.45 mmol, Eq: 1.6), 6-tert-butyl-8-fluorophthalazin-1(2H)-one (200 mg, 908 mumol, Eq: 1.00) and potassium carbonate (251 mg, 1.82 mmol, Eq: 2) were combined with DMSO (8 ml) to give a yellow solution. The solution was degassed for 5 min with argon. Copper(I) iodide (173 mg, 908 mumol, Eq: 1.00) was added. The reaction mixture was heated to 110 C and stirred for 2 h and the reaction was allowed to cool to room temperature. The reaction was diluted with 1:1 H2O/ sat. NH4Cl (80 mL) and the resulting solid collected by filtration. The solid was washed several times with 1:1 H2O/ sat. NH4Cl, then water (2X) and then EtOAc: hexanes (3:1, 2X). A lot of color in the organic phase. A brown solid remained. Solid was washed with EtOAc and then CH2Cl2 several times. The combined organic extracts were washed with water, dried over MgSO4 and concentrated in vacuo. The resulting residue was purified by flash chromatography (silica gel, 40 g, 5% to 30% EtOAc in hexanes) to afford the desired product (170 mg) as a white solid. (M+H)+ = 360 m/e. 1H NMR (300 MHz, CHLOROFORM-d) delta ppm 1.42 (s, 9 H) 7.40 – 7.65 (m, 3 H) 8.24 (d, J2.64 Hz, 1 H) 8.66 (d, J5.29 Hz, 1 H) 10.32 (s, 1 H).

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; BROTHERTON-PLEISS, Christine; JAIME-FIGUEROA, Saul; LOPEZ-TAPIA, Francisco Javier; LOU, Yan; OWENS, Timothy D.; WO2013/24078; (2013); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

The influence of catalyst in 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one reaction

1242156-59-7, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 1242156-59-7, you can also browse my other articles.

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7,the phthalazine compound. 1242156-59-7. Here is a downstream synthesis route of the compound 1242156-59-7

NaH (60%), 108 mg, 2.72 mmol) was added portionwise to a solution of 6-tert-butyl-8-fiuoro- 2H-phthalazin-l-one (which may be prepared as described in Berthel, S. et al. US 20100222325 Column 139; 300.0 mg, 1.36 mmol) in DMF (3 mL) at 0 C. The mixture was heated at 70 C for 30 min. The mixture was cooled to room temperature, a solution of (2-bromo-5- bromomethyl-4-fiuoro-phenyl)-methanol (203 mg, 0.68 mmol) in DMF (2 mL) was added and the mixture was stirred for 2.5 h at room temperature. Water (5 mL) was added, and the mixture was extracted with EtOAc (3 x 15 mL). The combined organic layers were dried (Na2S04), filtered, and evaporated. The residue was purified by preparative HPLC to give 2-(4-bromo-2- fluoro-5-hydroxymethyl-benzyl)-6-tert-butyl-8-fluoro-2H-phthalazin-l-one (59 mg, 10%). MS calcd. for CzoftoB^NzC^ [(M+H)+] 437, obsd. 436.8.

Some tips on 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, 1242156-59-7

1242156-59-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

Step 2: 1-(3-Bromo-2-formylphenyl)-3-(4-(morpholine-4-carbonyl)phenylamino)-1H-pyrazole-4-carbonitrile (34 mg, 0.0708 mmol), 6-tert-butyl-8-fluorophthalazin-1(2H)-one (31.2 mg, 0.142 mmol), cuprous iodide (27 mg, 0.142 mmol) and sodium bicarbonate (14.9 mg, 0.177 mmol) were combined in 1 mL of DMSO. The solution was degassed with argon and then heated in a microwave at 120 C. for 1 hr. The resulting mixture was extracted with ethyl acetate and ammonium chloride solution. The organic layer was concentrated and purified by flash column chromatography using ethyl acetate (containing 5% methanol) in hexanes (5% to 80% linear gradient in 15 minutes, 12 g silica gel) to give the pure desired product. This material was triturated with ether in hexanes and filtered to give 1-[3-(6-tert-butyl-8-fluoro-1-oxo-1H-phthalazin-2-yl)-phenyl]-3-[4-(morpholine-4-carbonyl)-phenylamino]-1H-pyrazole-4-carbonitrile (18.2 mg, 41.5% yield) as a pale pink solid. LC/MS clacd for C33H30FN7O3 (m/e) 591.24, obsd 592.0 (M+H, ES+); 1H NMR (400 MHz, DMSO-d6) delta ppm 1.38 (s, 9H), 3.50 (br., 4H), 3.59 (br., 4H), 7.37 (d, J=8.6 Hz, 2H), 7.59 (d, J=8.3 Hz, 1H), 7.65-7.71 (m, 3H), 7.78 (d, J=13.1 Hz, 1H), 7.87-7.93 (m, 2H), 8.08 (s, 1H), 8.58 (d, J=2.3 Hz, 1H), 9.29 (s, 1H), 9.47 (s, 1H).

Introduction of a new synthetic route about 1242156-59-7

It is a common heterocyclic compound, the phthalazine compound, 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7 its synthesis route is as follows.

To a stirred suspension of NaH (60%, 182 mg, 4.54 mmol) in DMF (1 mL) was added dropwise a solution of 6-tert-butyl-8-fluoro-2H-phthalazin-l-one (which may be prepared as described in Berthel, S. et al. US 20100222325 Column 139; 500 mg, 2.27 mmol) in DMF (1.5 mL) at 0 C. The mixture was heated to 70 C and stirred for 30 min. The mixture was cooled to room temperature, a solution of 5-bromo-2-bromomethyl-l,3-difluoro-benzene (715 mg, 2.5 mmol) in DMF (1.5 mL) was added and the mixture was stirred for 4 h at room temperature. The mixture was cooled and cold water (5 mL) was added. The mixture was extracted with EtOAc and the organic extract was dried, and evaporated. The residue was purified by chromatography (silica gel, 5-10% EtOAc/hexane) to give 2-(4-bromo-2,6-difluoro-benzyl)-6-tert-butyl-8-fluoro-2H- phthalazin-l-one (555 mg, 57%) as a yellow solid. MS calcd. for Ci9Hi7BrF3N20 [(M+H)+] 425, obsd. 425.

Analyzing the synthesis route of 1242156-59-7

Name is 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, as a common heterocyclic compound, it belongs to phthalazine compound, and cas is 1242156-59-7, its synthesis route is as follows.

In a 1 L round-bottomed flask, 6-tert-butyl-8-fluorophthalazin-1(2H)-one (5.6 g, 25.4 mmol, Eq: 1.00) was combined with THF (300 ml) to give a colorless solution. Sodium hydride (1.12 g, 28.0 mmol, Eq: 1.1) was added. The reaction mixture was stirred at ambient temperature for 10 min 2-Fluoro-4-iodonicotinaldehyde (7.02 g, 28.0 mmol, Eq: 1.1) was added and the reaction mixture was stirred at ambient temperature for 1 h. The reaction was complete as determined by LCMS analysis. The reaction mixture was quenched with saturated NH4Cl. The reaction mixture was poured into 200 mL H2O and extracted 3X with CH2Cl2. The organic layers were washed with brine, then dried over Na2SO4 and concentrated in vacuo. The resultant bright yellow solid was transferred into a filter funnel and the flask washed twice with a small volume of EtOAc to ensure complete transfer of the solid into the funnel. The liquid was filtered through. The solid was triturated twice with Et2O and dried under vacuum to afford the desired product as a cream-colored solid (8.09 g, 17.9 mmol, 70.5 % yield). (M+H) = 452 m/e. H NMR (400 MHz, CHLOROFORM-d) delta ppm 1.44 (s, 9 H) 7.49 – 7.54 (m, 1 H) 7.54 (d, J=1.77 Hz, 1 H) 8.03 (d, J=5.31 Hz, 1 H) 8.30 (d, J=2.53 Hz, 1 H) 8.37 (d, J=5.31 Hz, 1 H) 9.98 (s, 1 H).

Share a compound : 1242156-59-7

The chemical industry reduces the impact on the environment during synthesis,1242156-59-7,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,I believe this compound will play a more active role in future production and life.

To a 100 mL round bottom flask series added compound 4-1 (1.77 g, 8.04 mmol), commercially available starting material 4-2 (1.40 g, 8.84 mmol) and cesium carbonate (1.90 g, 4.82 mmol). The flask was evacuated and back filled with nitrogen three times. Then ethoxytrimethylsilane (1.90 g, 16.07 mmol) and DMF (20 mL) were added to the reaction flask, and the resulting mixture was heated 62C. After 5 h stirring, the solution was allowed to cool down to ambient temperature and the reaction was quenched by addition 20 mL of water. The desired product started to precipitate from DMF and watermixture. The solid was collected by filtration after cooling down to 5C, and washed with water. The filter cake was dried under vacuum oven at 50C to afford crude compound 3 (2.88 g, yield:99.8%) as a light yellow solid which was used for next step without purification.

Reference£º
Patent; CHEN, Yi; WO2015/50703; (2015); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Introduction of a new synthetic route about 1242156-59-7

To a stirred suspension of NaH (60%, 55 mg, 1.36 mmol) in DMF (5 mL) was added dropwise a solution of 6-tert-butyl-8-fluoro-2H-phthalazin-l-one (which may be prepared as described in Berthel, S. et al. US 20100222325 Column 139; 150.0 mg, 0.68 mmol) in DMF (10 mL) at 0 C. The mixture was heated to 70 C and stirred for 30 min. The mixture was cooled to room temperature, a solution of 4-bromo-l-chloromethyl-2-fluoro-benzene (available from Aldrich; 167.3 mg, 0.75 mmol) in DMF (5 mL) was added and the mixture was stirred for 4 h at room temperature. Aqueous NH4C1 solution was added. The mixture was extracted with EtOAc, and the EtOAc extract was dried, and evaporated. The residue was purified by chromatography (silica gel, 5% EtOAc/hexane) to give 2-(4-bromo-2-fluoro-benzyl)-6-tert-butyl-8-fluoro-2H- phthalazin-l-one (160 mg, 58%) as a white solid. MS calcd. for Ci9Hi8BrF2N20 [(M+H)+] 408, obsd. 408.

New learning discoveries about 1242156-59-7

Example 109a 3-Bromo-5-(6-tert-butyl-8-fluoro-1-oxo-1,2-dihydrophthalazin-2-yl)pyridine-4-carbaldehyde 109a A sealed tube equipped with a magnetic stirrer was charged with 6-tert-butyl-8-fluoro-1,2-dihydrophthalazin-1-one 101h (220 mg, 1.0 mmol), 3,5-dibromopyridine-4-carbaldehyde (530 mg, 2.0 mmol), CuI (190 mg, 1.0 mmol), 4,7-dimethoxy-1,10-phenanthroline (244 mg, 1.0 mmol), Cs2CO3 (652 mg, 2.0 mmol) and dioxane (8 mL). After three cycles of vacuum/argon flush, the mixture was heated at 110 C. for 5 h. It was then filtered and the filtrate was evaporated in vacuo. The residue was purified by silica gel column chromatography eluting with ethyl acetate/petroleum ether (1:3, V/V) to afford 109a (118 mg, 29.3%) as a solid. LCMS: [M+H]+ 406

Reference£º
Patent; GENENTECH, INC.; Crawford, James John; Ortwine, Daniel Fred; Wei, BinQing; Young, Wendy B.; US2013/116246; (2013); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem