Category: 1242156-59-7

6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7, it is a common heterocyclic compound, the phthalazine compound, its synthesis route is as follows.,1242156-59-7

In a 50 mL round-bottomed flask, 2-chloro-4-iodonicotinaldehyde (389 mg, 1.45 mmol, Eq: 1.6), 6-tert-butyl-8-fluorophthalazin-1(2H)-one (200 mg, 908 mumol, Eq: 1.00) and potassium carbonate (251 mg, 1.82 mmol, Eq: 2) were combined with DMSO (8 ml) to give a yellow solution. The solution was degassed for 5 min with argon. Copper(I) iodide (173 mg, 908 mumol, Eq: 1.00) was added. The reaction mixture was heated to 110 C and stirred for 2 h and the reaction was allowed to cool to room temperature. The reaction was diluted with 1:1 H2O/ sat. NH4Cl (80 mL) and the resulting solid collected by filtration. The solid was washed several times with 1:1 H2O/ sat. NH4Cl, then water (2X) and then EtOAc: hexanes (3:1, 2X). A lot of color in the organic phase. A brown solid remained. Solid was washed with EtOAc and then CH2Cl2 several times. The combined organic extracts were washed with water, dried over MgSO4 and concentrated in vacuo. The resulting residue was purified by flash chromatography (silica gel, 40 g, 5% to 30% EtOAc in hexanes) to afford the desired product (170 mg) as a white solid. (M+H)+ = 360 m/e. 1H NMR (300 MHz, CHLOROFORM-d) delta ppm 1.42 (s, 9 H) 7.40 – 7.65 (m, 3 H) 8.24 (d, J2.64 Hz, 1 H) 8.66 (d, J5.29 Hz, 1 H) 10.32 (s, 1 H).

With the rapid development of chemical substances, we look forward to future research findings about 1242156-59-7

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; BROTHERTON-PLEISS, Christine; JAIME-FIGUEROA, Saul; LOPEZ-TAPIA, Francisco Javier; LOU, Yan; OWENS, Timothy D.; WO2013/24078; (2013); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7, it is a common heterocyclic compound, the phthalazine compound, its synthesis route is as follows.,1242156-59-7

Example 109a 3-Bromo-5-(6-tert-butyl-8-fluoro-1-oxo-1,2-dihydrophthalazin-2-yl)pyridine-4-carbaldehyde 109a A sealed tube equipped with a magnetic stirrer was charged with 6-tert-butyl-8-fluoro-1,2-dihydrophthalazin-1-one 101h (220 mg, 1.0 mmol), 3,5-dibromopyridine-4-carbaldehyde (530 mg, 2.0 mmol), CuI (190 mg, 1.0 mmol), 4,7-dimethoxy-1,10-phenanthroline (244 mg, 1.0 mmol), Cs2CO3 (652 mg, 2.0 mmol) and dioxane (8 mL). After three cycles of vacuum/argon flush, the mixture was heated at 110 C. for 5 h. It was then filtered and the filtrate was evaporated in vacuo. The residue was purified by silica gel column chromatography eluting with ethyl acetate/petroleum ether (1:3, V/V) to afford 109a (118 mg, 29.3%) as a solid. LCMS: [M+H]+ 406

With the synthetic route has been constantly updated, we look forward to future research findings about 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,belong phthalazine compound

Reference£º
Patent; GENENTECH, INC.; Crawford, James John; Ortwine, Daniel Fred; Wei, BinQing; Young, Wendy B.; US2013/116246; (2013); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong phthalazine compound,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,1242156-59-7,Molecular formula: C12H13FN2O,mainly used in chemical industry, its synthesis route is as follows.,1242156-59-7

In a 1 L round-bottomed flask, 6-tert-butyl-8-fluorophthalazin-1(2H)-one (5.6 g, 25.4 mmol, Eq: 1.00) was combined with THF (300 ml) to give a colorless solution. Sodium hydride (1.12 g, 28.0 mmol, Eq: 1.1) was added. The reaction mixture was stirred at ambient temperature for 10 min 2-Fluoro-4-iodonicotinaldehyde (7.02 g, 28.0 mmol, Eq: 1.1) was added and the reaction mixture was stirred at ambient temperature for 1 h. The reaction was complete as determined by LCMS analysis. The reaction mixture was quenched with saturated NH4Cl. The reaction mixture was poured into 200 mL H2O and extracted 3X with CH2Cl2. The organic layers were washed with brine, then dried over Na2SO4 and concentrated in vacuo. The resultant bright yellow solid was transferred into a filter funnel and the flask washed twice with a small volume of EtOAc to ensure complete transfer of the solid into the funnel. The liquid was filtered through. The solid was triturated twice with Et2O and dried under vacuum to afford the desired product as a cream-colored solid (8.09 g, 17.9 mmol, 70.5 % yield). (M+H) = 452 m/e. H NMR (400 MHz, CHLOROFORM-d) delta ppm 1.44 (s, 9 H) 7.49 – 7.54 (m, 1 H) 7.54 (d, J=1.77 Hz, 1 H) 8.03 (d, J=5.31 Hz, 1 H) 8.30 (d, J=2.53 Hz, 1 H) 8.37 (d, J=5.31 Hz, 1 H) 9.98 (s, 1 H).

With the synthetic route has been constantly updated, we look forward to future research findings about 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,belong phthalazine compound

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; BROTHERTON-PLEISS, Christine; JAIME-FIGUEROA, Saul; LOPEZ-TAPIA, Francisco Javier; LOU, Yan; OWENS, Timothy D.; WO2013/24078; (2013); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

As a common heterocyclic compound, it belong phthalazine compound,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,1242156-59-7,Molecular formula: C12H13FN2O,mainly used in chemical industry, its synthesis route is as follows.,1242156-59-7

Example 101i 2-(6-tert-Butyl-8-fluoro-1-oxophthalazin-2(1H)-yl)-6-chlorobenzaldehyde 101i To a 10 mL round bottom flask were added 6-tert-butyl-8-fluoro-2H-phthalazin-1-one 101h (640 mg, 2.9 mmol), 2-chloro-6-fluorobenzaldehyde (506 mg, 3.2 mmol), and cesium carbonate (488 mg, 1.5 mmol). The flask was evacuated and backfilled with nitrogen three times then ethoxytrimethylsilane (684 mg, 5.8 mmol) and DMF (5 mL) were added to the reaction flask. The resulting mixture was heated to 60 C. After 4 h of stirring, the solution was allowed to cool down to ambient temperature and the reaction was quenched by addition of 2 mL of H2O drop-wise. The desired product started to precipitate from the DMF and water mixture. The solid was collected by filtration after cooling down to 5 C., and washed with DMF/water (2/1, 2 mL, pre-cooled to 6 C.) and H2O (2 mL). The filter cake was dried under vacuum oven at 65 C. for overnight to afford 519 mg (52%) of 101i as a yellow solid. MS: [M+H]+: 359

With the synthetic route has been constantly updated, we look forward to future research findings about 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,belong phthalazine compound

Reference£º
Patent; GENENTECH, INC.; Crawford, James John; Ortwine, Daniel Fred; Wei, BinQing; Young, Wendy B.; US2013/116246; (2013); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1242156-59-7,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

NaH (60%, 80 mg, 2 mmol) was added to a solution of 6-tert-butyl-8-fluoro-2H-phthalazin-l- one (which may be prepared as described in Berthel, S. et al. US 20100222325 Column 139; 220 mg, 1 mmol) in DMF (2 mL) at 0 C. The mixture was stirred for 5 min at 0 C and then heated at 70 C for 30 min. The mixture was cooled to room temperature, a solution of (5-bromo-2- bromomethyl-phenyl)-methanol (140 mg, 0.5 mmol) was added and the mixture was stirred for 1 h at room temperature. Ice-water (2 mL) was added. The mixture was extracted with EtOAc (3 x 25 mL). The EtOAc extract was washed with water (3 x 5 mL) and brine (5 mL), dried (Na2S04), filtered, and evaporated. The residue was purified by preparative HPLC to give 2-(4-bromo-2- hydroxymethyl-benzyl)-6-tert-butyl-8-fluoro-2H-phthalazin-l-one (62 mg, 15%) as a yellow gum. MS calcd. for C2oH2iBrFN202 [(M+H)+] 419, obsd. 418.8.

As the paragraph descriping shows that 1242156-59-7 is playing an increasingly important role.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; DOMINIQUE, Romyr; LOPEZ-TAPIA, Francisco Javier; MERTZ, Eric; SO, Sung-Sau; WO2014/76104; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1242156-59-7,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

NaH (60%), 108 mg, 2.72 mmol) was added portionwise to a solution of 6-tert-butyl-8-fiuoro- 2H-phthalazin-l-one (which may be prepared as described in Berthel, S. et al. US 20100222325 Column 139; 300.0 mg, 1.36 mmol) in DMF (3 mL) at 0 C. The mixture was heated at 70 C for 30 min. The mixture was cooled to room temperature, a solution of (2-bromo-5- bromomethyl-4-fiuoro-phenyl)-methanol (203 mg, 0.68 mmol) in DMF (2 mL) was added and the mixture was stirred for 2.5 h at room temperature. Water (5 mL) was added, and the mixture was extracted with EtOAc (3 x 15 mL). The combined organic layers were dried (Na2S04), filtered, and evaporated. The residue was purified by preparative HPLC to give 2-(4-bromo-2- fluoro-5-hydroxymethyl-benzyl)-6-tert-butyl-8-fluoro-2H-phthalazin-l-one (59 mg, 10%). MS calcd. for CzoftoB^NzC^ [(M+H)+] 437, obsd. 436.8.

1242156-59-7 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one 59473765, aphthalazine compound, is more and more widely used in various.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; DOMINIQUE, Romyr; LOPEZ-TAPIA, Francisco Javier; MERTZ, Eric; SO, Sung-Sau; WO2014/76104; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1242156-59-7,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

Step 2. In a 25 mL container, 1-(3-bromo-2-formylphenyl)-1H-pyrazole-3-carbonitrile (50 mg, 181 mumol, Eq: 1.00), 6-tert-butyl-8-fluorophthalazin-1(2H)-one (79.8 mg, 362 mumol, Eq: 2) and copper (I) iodide (69.0 mg, 362 mumol, Eq: 2.00) were combined with DMSO (2.00 ml) to give a yellow suspension. Sodium bicarbonate (38.0 mg, 453 mumol, Eq: 2.5) was added to it. The mixture was heated in a microwave at 120 C. for 1 hr. The reaction mixture was poured into 25 mL sat NH4Cl and extracted with EtOAc (3¡Á25 mL). The organic layers were dried over MgSO4 and concentrated in vacuo. The organic layer was concentrated and purified through ISCO flash column chromatography using ethyl acetate (containing 5% methanol) in hexanes (5% to 80% linear gradient in 15 minutes, 12 g silica gel) to give the pure desired product which was triturated with ether in hexanes and filtered to obtain 1-(3-(6-tert-butyl-8-fluoro-1-oxophthalazin-2(1H)-yl)-2-formylphenyl)-1H-pyrazole-3-carbonitrile (19 mg, 25%).

As the paragraph descriping shows that 1242156-59-7 is playing an increasingly important role.

Reference£º
Patent; Billedeau, Roland Joseph; Kondru, Rama K.; Lopez-Tapia, Francisco Javier; Lou, Yan; Owens, Timothy D.; Qian, Yimin; So, Sung-Sau; Thakkar, Kshitij C.; Wanner, Jutta; US2012/295885; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1242156-59-7,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

Step 2: To a solution of 6-tert-butyl-8-fluorophthlazine-1(2H)-one (prepared according to US2010/0222325) 36 mg, 0.16 mmol) and 1-(3-bromo-2-formylphenyl)-1H-indole-3-carbonitrile (59 mg, 0.18 mmol) in dry dimethylsulfoxide (1.8 mL) was added sodium bicarbonate (31 mg, 0.36 mmol) under an argon atmosphere. Next copper iodide (35 mg, 0.18 mmol) was added and the mixture was heated to 110 C. for 2 hours. The reaction was cooled to ambient and taken up in water (40 ml) and dichloromethane (40 ml). The material was filtered through a plug of celite, rinsing well with dichloromethane. The filtrate was transferred to a reparatory funnel and the dichloromethane phase was collected. This was washed with a 50% solution of diluted brine (40 ml). The organic phase was collected and the aqueous phases back extracted with dichloromethane (2¡Á35 ml). The dichloromethane phases were combined, dried (MgSO4), filtered and stripped. Then the identical reaction was repeated on a larger scale using 1-(3-bromo-2-formylphenyl)-1H-indole-3-carbonitrile (290 mg, 0.89 mmol) and similar scaled amounts of the reagents described above and under identical procedure and work up. The crude from the two reactions was combined and purified by HPLC (silica gel, eluting with 100% CH2Cl2 to 1% MeOH/CH2Cl2) to provide a semi-pure product. The material was further purified by preparative thin layer chromatography (3 plates, eluting with 0.5% MeOH/CH2Cl2 and then re-eluting with 0.75% and then 1% MeOH/CH2Cl2). The product band was collected to provide 1-(3-(6-tert-butyl-8-fluoro-1-oxophthalazin-2(1H)-yl)-2-formylphenyl)-1H-indole-3 carbonitrile as a yellow foamy solid. (384 mg, 77% yield). LC/MS calcd for C28H21FN4O2 (m/e) 464.49, obsd 465.0 (M+H, ES+): 1H NMR (300 MHz, CHLOROFORM-d) delta ppm 1.42 (s, 9H) 7.24-7.32 (m, 1H) 7.34-7.41 (m, 2H) 7.46-7.60 (m, 3H) 7.75 (d, J=7.55 Hz, 1H) 7.81 (s, 1 H) 7.83-7.87 (m, 1H) 7.90 (t, J=7.96 Hz, 1H) 8.25 (d, J=2.64 Hz, 1H) 9.56 (s, 1H).

The synthetic route of 1242156-59-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Billedeau, Roland Joseph; Kondru, Rama K.; Lopez-Tapia, Francisco Javier; Lou, Yan; Owens, Timothy D.; Qian, Yimin; So, Sung-Sau; Thakkar, Kshitij C.; Wanner, Jutta; US2012/295885; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

1242156-59-7, 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a 3 L round bottom flask were added 6-tert-butyl-8-fluoro-2H-phthalazin-1-one (132.3 g, 0.6 mol), 2-chloro-6-fluorobenzaldehyde (104.8 g, 0.66 mol) and cesium carbonate (117.4 g, 0.36 mol). The flask was evacuated and backfilled with Nitrogen three times. Then, ethoxytrimethylsilane (142 g, 1.2 mol) and DMF (1.6 L) were added to the reaction flask, and the resulting mixture was heated to 60 C. After 4 h stirring, the solution was allowed to cool down to ambient temperature and the reaction was quenched by addition of 800 mL of H2O dropwise. The desired product started to precipitate from DMF and water mixture. The solid was collected by filtration after cooling down to 5 C., and washed with DMF/water (2/1, 750 mL, pre-cooled to 6 C.) and H2O (400 mL). The filter cake was dried under vacuum oven at 65 C. overnight to afford 147 g of the title compound (68.2% isolated yield) as a yellow solid. MS (ESI) 358, 360 (M+H)-.

As the paragraph descriping shows that 1242156-59-7 is playing an increasingly important role.

Reference£º
Patent; Berthel, Steven; Firooznia, Fariborz; Fishlock, Daniel; Hong, Jun-Bae; Lou, Yan; Lucas, Matthew; Owens, Timothy D.; Sarma, Keshab; Sweeney, Zachary Kevin; Taygerly, Joshua Paul Gergely; US2010/222325; (2010); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

1242156-59-7, 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3: A oven dried flask was charged with 1-(2-formyl-3-iodo-phenyl)-3-iodo-1H-pyrazole-4-carbonitrile (1.703 g, 3.79 mmol), 6-tert-butyl-8-fluorophthalazin-1(2H)-one [prepared according to US2010/0222325] (919 mg, 4.17 mmol) and sodium bicarbonate (637 mg, 7.59 mmol) and taken up in dry dimethyl sulfoxide (30 ml). The mixture was degassed with argon in a sonication bath. Copper iodide (722 mg, 3.79 mmol) was added and the material was again degassed thoroughly. With sonication the mixture was heated to 60 C. for 2.5 hours and left at ambient overnight. Additional copper iodide (360 mg) was added and the material was heated for 4 hours at 60 C. under sonication. The flask was cooled to ambient and methylene chloride (40 ml) and water (40 ml) were added, with vigorous stirring. After 5 minutes the material was filtered through a plug of celite, rinsing well with a solution of 1% methanol in methylene chloride. The filtrate was transferred to a separatory funnel and the organic phase was collected. This was shaken with a 50% diluted brine solution (60 ml, some ragging). The methylene chloride phase was collected and the aqueous phases were back extracted with methylene chloride (note: some ragging observed. It helps to use larger volumes of organic and aqueous solutions on back extraction). The combined organic phase was dried with magnesium sulfate, filtered and stripped. The remainder was taken up in methylene chloride and purified through Analogix flash column chromatography eluting first with 100% dichloromethane (hold for 5 minutes) and then switch to a gradient of 1% to 3% methanol in dichloromethane (25 g silica gel) providing the desired 1-[3-(6-tert-butyl-8-fluoro-1-oxo-1H-phthalazin-2-yl)-2-formyl-phenyl]-3-iodo-1H-pyrazole-4-carbonitrile as a light brown powder (1.2 g). LC/MS calc’d for C23H17FIN5O2 (m/e) 541.32, obs’d 542 (M+H, ES+).

1242156-59-7 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one 59473765, aphthalazine compound, is more and more widely used in various.

Reference£º
Patent; Billedeau, Roland Joseph; Kondru, Rama K.; Lopez-Tapia, Francisco Javier; Lou, Yan; Owens, Timothy D.; Qian, Yimin; So, Sung-Sau; Thakkar, Kshitij C.; Wanner, Jutta; US2012/295885; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem