Category: 253-52-1

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.Phthalazine, cas is 253-52-1,the phthalazine compound. A new synthetic method of this compound is introduced below. 253-52-1

General procedure: A solution of 2.00 g (15.0 mmol) of 2 in 20 mL of dry THF was cooled to 0 ¡ãC, and 8.0 mL of 2.0 M isopropylmagnesium chloride (3b) (16.0 mmol) in ether was slowly added dropwise over 20 min. The reaction was allowed to stir at 0 ¡ãC for 5 h and was then quenched with 50 mL of saturated NH4Cl and extracted with ethyl acetate (3 .x. 50 mL). The combined organic extracts were washed with saturated NaCl, dried (MgSO4), and concentrated under vacuum to give dihydrophthalazine 4b as a viscous, brown oil. This oil was dried under high vacuum for 30 min and was used without further purification.The crude 4b in dichloromethane at 0 ¡ãC was treated, as above, with 1.82 g (2.50 mL, 18.0 mmol) of triethylamine and 1.40 g (1.26 mL, 15.5 mmol) of 5, and the reaction was stirred for 2 h. Work-up and chromatography gave 1.83 g (40percent) of 6b as a viscous, brown oil.

The chemical industry reduces the impact on the environment during synthesis,253-52-1,Phthalazine,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Nammalwar, Baskar; Bunce, Richard A.; Berlin, K. Darrell; Bourne, Christina R.; Bourne, Philip C.; Barrow, Esther W.; Barrow, William W.; European Journal of Medicinal Chemistry; vol. 54; (2012); p. 387 – 396;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

253-52-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Phthalazine, cas is 253-52-1,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol. 3-(tert-Butylamino)-2-phenylpyrrolo[2,1-a]phthalazine-1-carbonitrile (4a). Reaction time 18 h. Yield 204 mg(86percent), pale-yellow crystals, mp 173?174¡ãC. IR spectrum,nu, cm?1: 3385 (NH), 3065, 2861 (CH), 2226 (CN), 1604,1486, 764, 729 (Ar). 1H NMR spectrum, delta, ppm (J, Hz):8.90 (1H, s, H-6); 8.75 (1H, d, J = 8.0, H-10); 8.05?7.25(8H, m, H Ar); 4.12 (1H, br. s, NH); 0.99 (9H, s, 3CH3).13C NMR spectrum, delta, ppm: 146.1 (=N); 134.4 (?NH);131.4 ( Ar); 129.8 ( Ar); 129.5 ( Ar); 129.1 ( Ar);128.8 ( Ar); 128.0 ( Ar); 126.1 ( Ar); 125.9 ( Ar);124.7 ( Ar); 122.5 ( Ar); 120.0 ( Ar); 116.2 ( Ar);112.7 (CN); 100.2 ( Ar); 55.4 ((CH3)3); 31.4 (CH3).Mass spectrum, m/z (Irel, percent): 340 [M]+ (17), 314 (12), 284(100), 222 (13), 206 (10), 168 (18), 129 (12), 56 (89).Found, percent: C 77.79; H 6.10; N 16.51. 22H20N4. Calculated, percent: C 77.62; H 5.92; N 16.46.

253-52-1. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.253-52-1, if you are interested, you can browse my other articles.

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.Phthalazine, cas is 253-52-1,the phthalazine compound. An updated downstream synthesis route of 253-52-1 as follows. 253-52-1

Example 13 Preparation of 4-(4-Acetylaminophenyl)-1,2-Dihydro-6-Methylthiophthalazine (15) To a solution of the phthalazine 7 (130 mg, 0.42 mmol) in acetic acid (7 mL) was added NaBH3CN in portions. After stirring for 15 min, water was added. The aqueous phase was neutralized by NaHCO3, and then extracted with DCM. The combined organic phase was dried over Na2SO4. Removal of the solvent afforded the product (97 mg, 74percent) which can be used directly for next step.

253-52-1, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 253-52-1, you can also browse my other articles.

Reference£º
Patent; Pei, Xue-Feng; Li, Baoqing; Maccecchini, Maria-Luisa; US2002/6925; (2002); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

We know that the rate of many reactions can be accelerated by catalysts. A catalyst speeds up the rate of a reaction by lowering the activation energy; in addition, the catalyst is regenerated in the process. Phthalazine, cas is 253-52-1,the phthalazine compound, below Introduce a new synthetic route., 253-52-1

General procedure: In a Schlenk tube charged with a stirring bar, the air-stable bidentate Lewis acid catalyst B (5.00 mol percent) and the stated solvent were added under N2. Then, the phthalazine (1.00 equiv), dienophile (2.00 equiv; for enamines, generated in situ from aldehyde and amine) were added subsequently. The reaction mixture was stirred at the given temperature. After the reaction was finished, the solvent was removed. The remaining residue was purified by flash column chromatography over SiO2 to obtain the product.

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about 253-52-1, if you are interested., 253-52-1

Reference£º
Article; Hong, Longcheng; Ahles, Sebastian; Heindl, Andreas H.; Tietcha, Gastelle; Petrov, Andrey; Lu, Zhenpin; Logemann, Christian; Wegner, Hermann A.; Beilstein Journal of Organic Chemistry; vol. 14; (2018); p. 618 – 625;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. 253-52-1, If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.Phthalazine, cas is 253-52-1,the phthalazine compound. A new synthetic method of this compound is introduced below.

General procedure: Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol.

253-52-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,253-52-1 ,Phthalazine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

253-52-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Phthalazine, cas is 253-52-1,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol.

253-52-1. Other significant industrial processes that involve the use of heterogeneous catalysts include the preparation of sulfuric acid, the preparation of ammonia, the oxidation of ammonia to nitric acid, and the synthesis of methanol.253-52-1, if you are interested, you can browse my other articles.

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

An elementary termolecular reaction involves the simultaneous collision of three atoms, molecules, or ions.Phthalazine, cas is 253-52-1,the phthalazine compound. 253-52-1. Here is a downstream synthesis route of the compound 253-52-1

28.1. Preparation of 1-furan-2-yl-1,2-dihydrophthalazine 22.5 ml of an about 1.6M solution of butyllithium are slowly added dropwise at -78¡ã C. to a solution of 2.46 g of furan in 30 ml of tetrahydrofuran. The mixture is stirred at -78¡ã C. for 20 min., then at -20¡ã C. for 2 hrs. The solution is again cooled to -78¡ã C. and treated slowly with a solution of 4.68 g of phthalazine in 36 ml of tetrahydrofuran. The mixture is stirred at -78¡ã C. for 2 hrs., then poured on to about 500 ml of ice-water and extracted 4 times with 150 ml of ethyl acetate each time. The organic phases are dried, concentrated and the residue is chromatographed immediately on 120 g of silica gel; eluent: hexane/ethyl acetate 3:7. 4.08 g of dark, impure 1-furan-2-yl-1,2-dihydrophthalazine are isolated. The following compounds of formula IV are prepared in analogy to Example 28.1.:

253-52-1, A chemical reaction often occurs in steps, although it may not always be obvious to an observer. Thank you very much for taking the time to read this article. If you are also interested in other aspects of 253-52-1, you can also browse my other articles.

Reference£º
Patent; Hoffmann-La Roche Inc.; US6114330; (2000); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

One of the major reasons is to use measurements of the macroscopic properties of a system, 253-52-1, such as the rate of change in the concentration of reactants or products with time, to discover the sequence of events that occur at the molecular level.Phthalazine, cas is 253-52-1,the phthalazine compound, introduce a new downstream synthesis route.

General procedure: Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol.

The chemical industry reduces the impact on the environment during synthesis,253-52-1,Phthalazine,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

The molecularity of an elementary reaction is the number of molecules that collide during that step in the mechanism. 253-52-1, If there is only a single reactant molecule in an elementary reaction, that step is designated as unimolecular.Phthalazine, cas is 253-52-1,the phthalazine compound. A new synthetic method of this compound is introduced below.

To a stirred solution of 1-methylindole (1.50 g, 11.4 mmol) in dry THF (25 mL) was added dropwise n-BuLi (6.86 mL,17.2 mmol, 2.5 M in hexanes) over a period of 30 min at ?78 ¡ãC. The solution was warmed to ?25 ¡ãC, and stirring was continued at this temperature for 1 h. The reaction mixture was cooled to ?78 ¡ãC, and a solution of 4 (1.48 g, 11.4 mmol) in dry THF (20 mL) was added dropwise over 30 min. The reaction mixture was stirred at this temperature for 2 h. The mixture was poured into saturated NH4Cl (100 mL) and extracted with EtOAc (3 ¡Á 50 mL). The combined organic extracts were washed with saturated NaCl (50 mL), dried (MgSO4), filtered, and concentrated under vacuum to give 5l as a light yellow liquid. The crude product 5l was dissolved in DCM (100 mL), and TEA (2.08 g, 2.87 mL, 20.6 mmol) was added, followed by dropwise addition of acryloyl chloride (0.81 g, 0.73 mL, 8.95 mmol) at 0 ¡ãC. The reaction mixture was stirred at this temperature for an additional 2 h. The aqueous layer was added to saturated NaCl (50 mL), and the organic layer was separated. The aqueous layer was extracted with DCM (2 ¡Á 30 mL), and the combined organic extracts were washed with saturated NaCl (50 mL), dried (MgSO4), filtered, and concentrated to afford the crude product. The product was purified on a silica gel column eluted with hexanes?EtOAc (7:3) to afford 2l (3.01 g, 62percent) as a light yellow solid

253-52-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,253-52-1 ,Phthalazine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Muddala, Nagendra Prasad; Nammalwar, Baskar; Selvaraju, Subhashini; Bourne, Christina R.; Henry, Mary; Bunce, Richard A.; Berlin, K. Darrell; Barrow, Esther W.; Barrow, William W.; Molecules; vol. 20; 4; (2015); p. 7222 – 7244;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

253-52-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Phthalazine, cas is 253-52-1,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

Specific preparation methods are: no special protection, clean air to a single-necked flask were added sequentially magneton, phthalazine(52mg, 0.4mmol), was added sodium iodide (18mg, 30molpercent), 70percent of the mass fraction of the water phase of t-butyl hydroperoxide(152mg, 1.2mmol), then add toluene (728.8mg, 8mmol), toluene as both reactant and as a solvent, the reaction at 150 1Hours TLC showed the starting material is completely consumed phthalazine. Heating was stopped to quench the reaction. Without extraction, direct wetLoading, 200-300 mesh silica gel column chromatography, a mixed solvent of ethyl acetate and petroleum ether (1: 4) rinse. Separated structure of formula IXaFormula compound 84.0mg, 89percent yield;

The chemical industry reduces the impact on the environment during synthesis,253-52-1,Phthalazine,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Xiangtan University; Yang, Luo; Luo, Wenkun; (17 pag.)CN105503724; (2016); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem