Category: phthalazine

1242156-59-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

To a 100 mL round bottom flask series added compound 4-1 (1.77 g, 8.04 mmol), commercially available starting material 4-2 (1.40 g, 8.84 mmol) and cesium carbonate (1.90 g, 4.82 mmol). The flask was evacuated and back filled with nitrogen three times. Then ethoxytrimethylsilane (1.90 g, 16.07 mmol) and DMF (20 mL) were added to the reaction flask, and the resulting mixture was heated 62C. After 5 h stirring, the solution was allowed to cool down to ambient temperature and the reaction was quenched by addition 20 mL of water. The desired product started to precipitate from DMF and watermixture. The solid was collected by filtration after cooling down to 5C, and washed with water. The filter cake was dried under vacuum oven at 50C to afford crude compound 3 (2.88 g, yield:99.8%) as a light yellow solid which was used for next step without purification.

The chemical industry reduces the impact on the environment during synthesis,1242156-59-7,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; CHEN, Yi; WO2015/50703; (2015); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

It is a common heterocyclic compound, the phthalazine compound, 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3 its synthesis route is as follows.

EXAM PLE A.2. Compound c-1 (127l): 4-(4-fluoro-3-(4-(3-iodobenzoyl)piperazine-l-carbonyl)benzyl)- phthalazin-l(2H)-one. (0301) [0148] To a solution of 4-(4-fluoro-3-(piperazine-l-carbonyl)benzyl)phthalazin-l(2H)-one (10 mg, 0.0275 mmol), triethylamine (40 mu, 0.3 mmol) a nd H BTU (16 mg, 0.0413 mmol) in dimethyl formamide (DM F, 500 mu) was added to 3-iodobenzoic acid (6 mg, 0.0275 mmol). The mixtu re was stirred at room temperature for 20 h. The crude product was then purified by preparative HPLC and dried under vacuum, yielding a white solid (6.9 mg, 48% yield). 1H NM R (CDCIs) delta = 10.00 (s, 1H), 8.40-8.38 (m, 1H), 7.71-7.69 (m, 4H), 7.64-7.63 (m, 1H), 7.30-7.26 (m, 3H), 7.09 (m, 1H), 7.04-6.87 (m, 1H), 4.21 (s, 2H), 3.71-3.29 (m, 8H). LC-ESI-MS (+) m/z = 597.1 [M+H+]+. H RMS-ESI [M-H+]” m/z calculated for [C27H22FIN4O3]- 595.0642, found 595.0660.

763111-47-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,763111-47-3 ,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; MEMORIAL SLOAN KETTERING CANCER CENTER; REINER, Thomas; LEWIS, Jason S.; WEBER, Wolfgang; RODRIGUEZ, Beatriz Salinas; CARNEY, Brandon; CARLUCCI, Giuseppe; (89 pag.)WO2016/33293; (2016); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

3682-14-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 6-Amino-2,3-dihydrophthalazine-1,4-dione, cas is 3682-14-2,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

A solution of 400 mg (1.44 mM) of 4-chloro-6,7-diethoxy-quinoline-3-carbonitrile and 273 mg (1.54 mM) of 4-Aminophthalhydrazide Hydrate in 15 ml of 2-methoxyethanol was refluxed for 3 hours. To the warm solution was added 1 ml of 1M sodium carbonate and the sample was heated for 5 minutes at 100C, then poured into 300 ml of ice water. The solution was made acetic by addition of concentrated HCl and the solid was collected, washed with water followed by ether and dried under vacuum at 80C. The solid was taken up into 200 ml of methanol and 500l of 5 N sodium hydroxide and boiled for 20 minutes. To this heterogeneous mixture was added 100 ml of glacial acetic acid and the volume was reduced to a total of 100 ml by boiling. To the room temperature mixture, 500 ml of ice cold water was added and the solid was collected, washed with water followed by ether and dried under vacuum at 80C. The solid was digested in 400 ml of ethanol until the volume had been reduced to 150 ml. The hot solution was filtered and the solid was washed with ethanol and to dried under vacuum at 80C yield 121 mg of the title compound as a white solid: mass spectrum (electrospray, m/e): M+H 418.0, mp = >270C.

The chemical industry reduces the impact on the environment during synthesis,3682-14-2,6-Amino-2,3-dihydrophthalazine-1,4-dione,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Wyeth Holdings Corporation; EP1117659; (2003); B1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to phthalazine compound, name is 6-Bromophthalazine-1,4-diol, and cas is 76240-49-8, its synthesis route is as follows.

6-Bromo-2,3-dihydrophthalazine-1 ,4-dione (25. g, 0.10 mol) was added to a mixture of phosphorus oxychloride (100. mL, 1 .06 mol) and thionyl chloride (100. mL, 1 .37 mol) under nitrogen, cooled to 0 C. Once the initial exotherm had subsided the reaction mixture was allowed to warm to ambient temperature and then heated at 100 C for 4 h. The mixture was then cooled to ambient temperature and then concentrated in vacuo. The residue was dissolved in iPrOAc (350 mL) and washed with saturated sodium bicarbonate solution (added until effervescence stopped), a precipitate formed, the two layers were filtered to isolate the first crop of the intermediate. The organic layer was collected and distilled to dryness to give the second crop of the intermediate. The solids were combined and partitioned between 1 ,4-dioxane (200 mL) and 2 N NaOH (100 mL). The resulting mixture was heated at 40 C overnight and then cooled to ambient temperature and left to stand. The solid precipitate was filtered (first crop of product) and the resulting solution partitioned between EtOAc (250 mL) and water (200 mL). Further precipitate formed which was filtered and combined with the first crop of the product, the organic phase was separated and evaporated to dryness to give the second crop of the product. Product isolated is a mixture of two regioisomers, 7-bromo-4-chloro-2H-phthalazin-1 -one and 6- bromo-4-chloro-2H-phthalazin-1 -one, total yield isolated (17.6 g, 68.0 mmol, 66%).1 H NMR (300MHz, DMSO-d6) delta = 13.02 (s, 1 H), 12.98 (s, 1 H), 8.36 (d, J = 2.1 Hz, 1 H), 8.22 (dd, J = 2.1 , 8.6 Hz, 1 H), 8.17 – 8.1 1 (m, 3H), 7.93 (d, J = 8.7 Hz, 1 H). 1 :1 mixture of the two regioisomers.

76240-49-8, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,76240-49-8 ,6-Bromophthalazine-1,4-diol, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; MCGONAGLE, Alison E.; JORDAN, Allan; WASZKOWYCZ, Bohdan; HUTTON, Colin; WADDELL, Ian; HITCHIN, James R.; SMITH, Kate Mary; HAMILTON, Niall M.; (497 pag.)WO2016/92326; (2016); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to phthalazine compound, name is Phthalazin-1(2H)-one, and cas is 119-39-1, its synthesis route is as follows.

1b) 1-Chlorophthalazine hydrochloride A suspension of 50 g (342 mmol) phthalazone, 1370 ml acetonitrile, 66 ml (0.72 mol) POCl3 and 85 ml 4 N HCl in dioxane is stirred for 8 h at 50 C. The resulting solution is cooled to RT, evaporated to a volume of about 0.8 l and diluted with 1.2 l DIPE. Filtration and washing with DIPE yield the title compound: FAB-MS (M+H)+=165/167.

119-39-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,119-39-1 ,Phthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Bold, Guido; Dawson King, Janet; Frei, Jorg; Heng, Richard; Manley, Paul William; Wietfeld, Bernhard; Wood, Jeanette Marjorie; US2003/13718; (2003); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3, it is a common heterocyclic compound, the phthalazine compound, its synthesis route is as follows.

A reaction mixture of amine precursor (51 mg, 0.139 mmol), 4-carboxylphenylboronic acid pinacol ester (38 mg, 0.153 mmol), HATU (60 mg, 0.158 mmol) and DIPEA (50 muL) in DMF (1 mL) was stirred at room temperature overnight. Water (10 mL) was added, and precipitate was filtered and rinsed with water, and then dissolved in ethyl acetate. After drying by magnesium sulfate, the solution was concentrated under reduced pressure. The residue was purified by silica gel chromatography to afford final product (37 mg) as white solid. M.P.: 288-291 C; 1H NMR (400MHz, CDCl3) delta 10.66 (s, 1H), 8.47 (s, 1H), 7.85-7.72 (m, 5H), 7.38-7.33 (m, 4H), 7.04 (m, 1H), 4.29 (s, 2H), 3.73 (m, 4H), 3.37 (m, 4H), 1.35 (s, 9H), 1.27 (s, 3H). 13C NMR (100MHz, CDCl3) delta 160.4, 145.5, 142.2, 135.0, 134.4, 133.7, 131.6, 129.5, 129.2, 128.3, 127.2, 126.1, 125.0, 121.5, 84.1, 37.7, 29.7, 24.8; HRMS m/z: calcd for C33H34BFN4O5+H, 597.2679; found 579.2661.

763111-47-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,763111-47-3 ,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Zhou, Dong; Chu, Wenhua; Voller, Thomas; Katzenellenbogen, John A.; Tetrahedron Letters; vol. 59; 20; (2018); p. 1963 – 1967;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

As a common heterocyclic compound, it belongs to phthalazine compound, name is 6-Bromophthalazin-1(2H)-one, and cas is 75884-70-7, its synthesis route is as follows.

j0202] 6-l3romo-1-chlorophthalazine (9c) In a flame dried 50 mE round bottom flask was added 6-bromophthalazin-1 (2H)-one (402 mg, 1.78 mmol), anhydrous acetonitrile (18 mE), and phosphorus oxychloride (0.5 mE, 5.36 mmol). The mixture was refluxed for 2 hours, then cooled to 0 C., diluted with dichloromethane (40 mE), and quenched with a dropwise addition of sat. aq. NaHCO3 (40 mE). The biphasicmixture was stirred vigorously and allowed to warm to room temperature. Afier 1 hour the layers were separated andaqueous was extractedwith dichioromethane (2×50 mE).combined organic layers were washed with sat. aq. NaHCO3 (40 mE), washed with brine (30 mE), dried over Na2504,concentrated to yield 29c as a yellow solid in 94% yield.NMR (500 MHz, CDC13) oe 9.39 (s, 1H), 8.17-8.21 (m, 2H), 8.10 (dd, J=8.8, 2.0 Hz, 1H). ECMS found 242.9 [M+H].

75884-70-7, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,75884-70-7 ,6-Bromophthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Northeastern University; POLLASTRI, Michael P.; MEHTA, Naimee; DEVINE, William; WOODRING, Jennifer; SWAMINATHAN, Uma; US2015/259331; (2015); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

763111-47-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

4-[[4-Fluoro-3-(piperazine-1-carbonyl)phenyl]methyl]-2H-phthalazin-1-one (11) (86 mg, 0.24 mmol), HBTU (116 mg, 0.30 mmol) and triethylamine (164 muL, 1.18 mmol) were added to a solution of 2-hydroxyacetic acid (36 mg, 0.48 mmol) in DMF (1.5 mL) and the reaction mixture was stirred at room temperature for 40 minutes, before dichloromethane (4 mL) and water (4 mL) were added, the organic phase separated and washed with NaOH (0.2 M, 3*4 mL) and water (3*4 mL). The organic phase was dried over MgSO4, volatiles were removed in vacuo and the resulting crude material was purified via HPLC, yielding the title compound as a clear solid (24.3 mg, 0.06 mumol, 50%).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, 763111-47-3

Reference£º
Patent; THE GENERAL HOSPITAL CORPORATION; Reiner, Thomas; Keliher, Edmund J.; Weissleder, Ralph; US2013/309170; (2013); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Name is Phthalazine, as a common heterocyclic compound, it belongs to phthalazine compound, and cas is 253-52-1, its synthesis route is as follows.

To a stirred solution of 1-methylindole (1.50 g, 11.4 mmol) in dry THF (25 mL) was added dropwise n-BuLi (6.86 mL,17.2 mmol, 2.5 M in hexanes) over a period of 30 min at ?78 ¡ãC. The solution was warmed to ?25 ¡ãC, and stirring was continued at this temperature for 1 h. The reaction mixture was cooled to ?78 ¡ãC, and a solution of 4 (1.48 g, 11.4 mmol) in dry THF (20 mL) was added dropwise over 30 min. The reaction mixture was stirred at this temperature for 2 h. The mixture was poured into saturated NH4Cl (100 mL) and extracted with EtOAc (3 ¡Á 50 mL). The combined organic extracts were washed with saturated NaCl (50 mL), dried (MgSO4), filtered, and concentrated under vacuum to give 5l as a light yellow liquid. The crude product 5l was dissolved in DCM (100 mL), and TEA (2.08 g, 2.87 mL, 20.6 mmol) was added, followed by dropwise addition of acryloyl chloride (0.81 g, 0.73 mL, 8.95 mmol) at 0 ¡ãC. The reaction mixture was stirred at this temperature for an additional 2 h. The aqueous layer was added to saturated NaCl (50 mL), and the organic layer was separated. The aqueous layer was extracted with DCM (2 ¡Á 30 mL), and the combined organic extracts were washed with saturated NaCl (50 mL), dried (MgSO4), filtered, and concentrated to afford the crude product. The product was purified on a silica gel column eluted with hexanes?EtOAc (7:3) to afford 2l (3.01 g, 62percent) as a light yellow solid

253-52-1, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,253-52-1 ,Phthalazine, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Muddala, Nagendra Prasad; Nammalwar, Baskar; Selvaraju, Subhashini; Bourne, Christina R.; Henry, Mary; Bunce, Richard A.; Berlin, K. Darrell; Barrow, Esther W.; Barrow, William W.; Molecules; vol. 20; 4; (2015); p. 7222 – 7244;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

763111-47-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

4-(4-Fluoro-3-(piperazin-1-yl-carbonyl)-benzyl)pyridazine-1(2H)one (5) (1.56 g, 4.26 mmol) was added to a 25 ml three-necked flask.And added dichloromethane (6.5 ml), trans-4-dimethylamino crotonic acid (0.78 g, 6.04 mmol),HOBT (0.87 g, 6.44 mmol), EDCI (1.23 g, 6.42 mmol), and then cooled to 0-10 C, then DIPEA (4.42 g, 34.3 mmol) was added dropwise, and the mixture was allowed to warm to room temperature and stirred for 2 h.After TLC showed that the reaction was completed, the reaction mixture was quenched with water (30 mL).The solid crude product was added to the acid water, the impurities were extracted with dichloromethane, the aqueous phase was made alkaline, and the product was extracted with dichloromethane (20 mL¡Á3);The combined organic phases were dried over anhydrous sodium sulfate, filtered and evaporatedThe white solid product was then beaten with n-hexane (5 ml).Filter and dry to give 470 mg of a white solid.The yield was 23%.

The chemical industry reduces the impact on the environment during synthesis,763111-47-3,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Shanghai Bobang Pharmaceutical Technology Co., Ltd.; Gao Heyong; Liu Zhende; Zhang Wensheng; (28 pag.)CN108383798; (2018); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem