Category: phthalazine

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.3682-14-2,6-Amino-2,3-dihydrophthalazine-1,4-dione,as a common compound, the synthetic route is as follows.

Example 334: Preparation of 6-((4-(cyclopropyIamino)-5-(trifluoromethyl)pyrimidin-2- yl)amino)-2,3-dihydrophthalazine-l,4-dione2-Chloro-N-cyclopropyl-5-(trifluoromethyl)pyrimidin-4-amine (0.055 g, 0.231 mmol) and 6-amino-2,3-dihydrophthalazine-1 ,4-dione (0.041 g, 0.231 mmol) were mixed in acetic acid (2 ml). The mixture was microwaved at 1 10 ¡ãC for 20 min and then concentrated. Added MeOH and 5percent DMF and filtered the solid to give 35 mg of product. MS calcd for [Ci6H13F3N602+H]+: 379.12, found 379.00.

As the paragraph descriping shows that 3682-14-2 is playing an increasingly important role.

Reference£º
Patent; SALK INSTITUTE FOR BIOLOGICAL STUDIES; SANFORD-BURNHAM MEDICAL RESEARCH INSTITUTE; YALE UNIVERSITY; SHAW, Reuben J.; EGAN, Daniel F.; COSFORD, Nicholas; TURK, Benjamin; VAMOS, Mitchell; PANICKAR, Dhanya Raveendra; CHUN, Matthew; SHEFFLER, Doug; (315 pag.)WO2016/33100; (2016); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1242156-59-7,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

NaH (60%, 80 mg, 2 mmol) was added to a solution of 6-tert-butyl-8-fluoro-2H-phthalazin-l- one (which may be prepared as described in Berthel, S. et al. US 20100222325 Column 139; 220 mg, 1 mmol) in DMF (2 mL) at 0 C. The mixture was stirred for 5 min at 0 C and then heated at 70 C for 30 min. The mixture was cooled to room temperature, a solution of (5-bromo-2- bromomethyl-phenyl)-methanol (140 mg, 0.5 mmol) was added and the mixture was stirred for 1 h at room temperature. Ice-water (2 mL) was added. The mixture was extracted with EtOAc (3 x 25 mL). The EtOAc extract was washed with water (3 x 5 mL) and brine (5 mL), dried (Na2S04), filtered, and evaporated. The residue was purified by preparative HPLC to give 2-(4-bromo-2- hydroxymethyl-benzyl)-6-tert-butyl-8-fluoro-2H-phthalazin-l-one (62 mg, 15%) as a yellow gum. MS calcd. for C2oH2iBrFN202 [(M+H)+] 419, obsd. 418.8.

As the paragraph descriping shows that 1242156-59-7 is playing an increasingly important role.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; DOMINIQUE, Romyr; LOPEZ-TAPIA, Francisco Javier; MERTZ, Eric; SO, Sung-Sau; WO2014/76104; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1242156-59-7,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

Step 2: To a solution of 6-tert-butyl-8-fluorophthlazine-1(2H)-one (prepared according to US2010/0222325) 36 mg, 0.16 mmol) and 1-(3-bromo-2-formylphenyl)-1H-indole-3-carbonitrile (59 mg, 0.18 mmol) in dry dimethylsulfoxide (1.8 mL) was added sodium bicarbonate (31 mg, 0.36 mmol) under an argon atmosphere. Next copper iodide (35 mg, 0.18 mmol) was added and the mixture was heated to 110 C. for 2 hours. The reaction was cooled to ambient and taken up in water (40 ml) and dichloromethane (40 ml). The material was filtered through a plug of celite, rinsing well with dichloromethane. The filtrate was transferred to a reparatory funnel and the dichloromethane phase was collected. This was washed with a 50% solution of diluted brine (40 ml). The organic phase was collected and the aqueous phases back extracted with dichloromethane (2¡Á35 ml). The dichloromethane phases were combined, dried (MgSO4), filtered and stripped. Then the identical reaction was repeated on a larger scale using 1-(3-bromo-2-formylphenyl)-1H-indole-3-carbonitrile (290 mg, 0.89 mmol) and similar scaled amounts of the reagents described above and under identical procedure and work up. The crude from the two reactions was combined and purified by HPLC (silica gel, eluting with 100% CH2Cl2 to 1% MeOH/CH2Cl2) to provide a semi-pure product. The material was further purified by preparative thin layer chromatography (3 plates, eluting with 0.5% MeOH/CH2Cl2 and then re-eluting with 0.75% and then 1% MeOH/CH2Cl2). The product band was collected to provide 1-(3-(6-tert-butyl-8-fluoro-1-oxophthalazin-2(1H)-yl)-2-formylphenyl)-1H-indole-3 carbonitrile as a yellow foamy solid. (384 mg, 77% yield). LC/MS calcd for C28H21FN4O2 (m/e) 464.49, obsd 465.0 (M+H, ES+): 1H NMR (300 MHz, CHLOROFORM-d) delta ppm 1.42 (s, 9H) 7.24-7.32 (m, 1H) 7.34-7.41 (m, 2H) 7.46-7.60 (m, 3H) 7.75 (d, J=7.55 Hz, 1H) 7.81 (s, 1 H) 7.83-7.87 (m, 1H) 7.90 (t, J=7.96 Hz, 1H) 8.25 (d, J=2.64 Hz, 1H) 9.56 (s, 1H).

The synthetic route of 1242156-59-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Billedeau, Roland Joseph; Kondru, Rama K.; Lopez-Tapia, Francisco Javier; Lou, Yan; Owens, Timothy D.; Qian, Yimin; So, Sung-Sau; Thakkar, Kshitij C.; Wanner, Jutta; US2012/295885; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.763111-47-3,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

General procedure: Compound 4 (400 mg, 1.09 mmol, 1 eq) was dissolved in acetonitrile(10 ml), and then 5a-c (1 eq) and DIEA (2 eq) were added.The mixture was stirred at room temperature for 2 h, and then theprecipitate was filtered, washed with water, acetonitrile and ethylether, and dried to give products 6a-c.

As the paragraph descriping shows that 763111-47-3 is playing an increasingly important role.

Reference£º
Article; Yuan, Zigao; Chen, Shaopeng; Sun, Qinsheng; Wang, Ning; Li, Dan; Miao, Shuangshuang; Gao, Chunmei; Chen, Yuzong; Tan, Chunyan; Jiang, Yuyang; Bioorganic and Medicinal Chemistry; vol. 25; 15; (2017); p. 4100 – 4109;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

1242156-59-7, 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a 3 L round bottom flask were added 6-tert-butyl-8-fluoro-2H-phthalazin-1-one (132.3 g, 0.6 mol), 2-chloro-6-fluorobenzaldehyde (104.8 g, 0.66 mol) and cesium carbonate (117.4 g, 0.36 mol). The flask was evacuated and backfilled with Nitrogen three times. Then, ethoxytrimethylsilane (142 g, 1.2 mol) and DMF (1.6 L) were added to the reaction flask, and the resulting mixture was heated to 60 C. After 4 h stirring, the solution was allowed to cool down to ambient temperature and the reaction was quenched by addition of 800 mL of H2O dropwise. The desired product started to precipitate from DMF and water mixture. The solid was collected by filtration after cooling down to 5 C., and washed with DMF/water (2/1, 750 mL, pre-cooled to 6 C.) and H2O (400 mL). The filter cake was dried under vacuum oven at 65 C. overnight to afford 147 g of the title compound (68.2% isolated yield) as a yellow solid. MS (ESI) 358, 360 (M+H)-.

As the paragraph descriping shows that 1242156-59-7 is playing an increasingly important role.

Reference£º
Patent; Berthel, Steven; Firooznia, Fariborz; Fishlock, Daniel; Hong, Jun-Bae; Lou, Yan; Lucas, Matthew; Owens, Timothy D.; Sarma, Keshab; Sweeney, Zachary Kevin; Taygerly, Joshua Paul Gergely; US2010/222325; (2010); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

763111-47-3, 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

At 50 C,To the reaction kettle by adding N, N-dimethylacetamide 2000ml,Was added with stirring 4- (4-fluoro-3- (piperazine-1-carbonyl) benzyl) -1-naphthyridine (2-hydro) – one (40g, 0.109mol),HATU (48 g, 0.126 mol),Cyclopropanecarboxylic acid (12 g, 0.139 mol)Finally, N, N-diisopropylethylamine (0.218 mol, 28.17 g, 38 ml) was added,30 C for 6 hours,Add 800ml of water,Slowly precipitate solid,Filter,washing,dry,To give 44 g of a white solid,That is,HPLC purity 99.87%Yield 92.8%.

763111-47-3 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one 11726399, aphthalazine compound, is more and more widely used in various.

Reference£º
Patent; Sichuan Kelun Drug Research Institute Co., Ltd.; Li, Hongming; Wu, Wei; Tuo, Shichuan; Wang, Lichun; Wang, Jingyi; (8 pag.)CN105985294; (2016); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.75884-70-7,6-Bromophthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

6-Bromo-l-chloro-phthalazine; A mixture of 6-Bromo-2H-phthalazin-l-one (2.5g), phosphorous oxychloride (11 mL) and diisopropyl ethyl amine (2 mL) was stirred at RT for 30 min then at 90 0C for3h. The reaction was then concentrated under reduced pressure, diluted with ethyl acetate and washed with a saturated solution OfNaHCO3, NH4Cl, and brine to afford the desired compound (2.0 g). TLC lambda/0.8 (EA/hexane 2/3).

75884-70-7 6-Bromophthalazin-1(2H)-one 11535918, aphthalazine compound, is more and more widely used in various.

Reference£º
Patent; FOREST LABORATORIES HOLDINGS LIMITED; WO2008/61108; (2008); A2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

89898-86-2, 5-Nitrophthalazine is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

B. A solution of 5-nitro-phthalazine (0.175 g, 1 mmol) and SnCl2 (0.57 g, 3 mmol) in concentrated HCl (10 mL) is stirred at room temperature for 2 h. Ice is added to the solution. A solution of 25% NaOH is added to pH 14 (litmus). The solution is cooled for 18 h. The solution is filtered. Aqueous filtrate is extracted twice with EtOAc. EtOAc layers are combined, washed with water, brine, dried over Na2SO4, filtered and concentrated to give phthalazin-5-ylamine (0.050 g).

As the paragraph descriping shows that 89898-86-2 is playing an increasingly important role.

Reference£º
Patent; Calvo, Raul R.; Cheung, Wing S.; Player, Mark R.; US2006/116368; (2006); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.763111-47-3,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

4-(4-Fluoro-3-(piperazin-1-yl-carbonyl)-benzyl)pyridazine-1(2H)one (5) (0.78 g, 2.13 mmol) was added to a 25 ml three-necked flask.And adding dichloromethane (6.5 ml), 2-butynoic acid (215 mg, 2.56 mmol), HOBT (431 mg, 3.20 mmol), EDCI (614 mg, 3.20 mmol), and stirring to 1-10 C,An excess of DIPEA (550 mg, 4.26 mmol) was added dropwise and the mixture was allowed to warm to room temperature.After TLC showed that the reaction was completed, the reaction mixture was directly concentrated to dryness, and the residue was mixed with water and then stirred for 1 hour and then filtered.Obtained as an off-white solid.The yield was 31%.

As the paragraph descriping shows that 763111-47-3 is playing an increasingly important role.

Reference£º
Patent; Shanghai Bobang Pharmaceutical Technology Co., Ltd.; Gao Heyong; Liu Zhende; Zhang Wensheng; (28 pag.)CN108383798; (2018); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.763111-47-3,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

4-[4-fluoro-3-(piperazin-1 -ylcarbonyl) benzyl] phthalazin-1 (2H)-one (IX) (40.0 g, 0.1 1 mol) and 1 H-benzotriazol-1 -yl(cyclopropyl)methanone (X) (26 g, 0.14 mol) were stirred in acetonitrile (320 mL) and the progress of reaction was monitored by HPLC. After completion of reaction, the resulted precipitate was filtered and washed with acetonitrile (40.0 mL) then dried to afford Olaparib (I) as a white to off- white solid. The PXRD pattern of Olaparib thus obtained matches with Form-A as illustrated in figure-3. (Yield: 90%, HPLC purity: 99.99%)

763111-47-3 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one 11726399, aphthalazine compound, is more and more widely used in various.

Reference£º
Patent; ALEMBIC PHARMACEUTICALS LIMITED; SIRIPRAGADA, Mahender Rao; VELISOJU, Mahendar; ANEGONDI, Shreenivasa Prasad; JOSHI, Yogesh Vasant; PANWAR, Amit; PATEL, Malvika; (35 pag.)WO2017/191562; (2017); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem