Tag: M.W:100-200

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.119-39-1,Phthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

General procedure: The reaction was carried out under argon. To a stirred suspension of sodium hydride (4.25 mol) in dry DMF (10 cm3) was added slowly a solution of 2H-phthalazin-1-one 2 (3.95¡Á10-3 mol) in dry DMF (50 cm3). The reaction mixture was stirred at room temperature for 45 minutes. Next, the whole lot was cooled to 0 C and the solution of N-(2-bromoethyl)phthalimide (5.92¡Á10-3 mol) in dry DMF (10 cm3) was added in portions. At first the mixture was kept for 5 hours in 0 C and later for 16 hours in ambient temperature. After this time the reaction mixture was poured into ice-water mixture (100 cm3) and next extracted with CHCl3 (3¡Á50 cm3). The combined extracts were dried over MgSO4 and concentrated under vacuum. The isoindole-1,3-dione 3 was isolated by column chromatography or crystallization.

119-39-1, 119-39-1 Phthalazin-1(2H)-one 8394, aphthalazine compound, is more and more widely used in various fields.

Reference£º
Article; Malinowski, Zbigniew; Sroczy?ski, Dariusz; Szczes?niak, Aleksandra K.; Synthetic Communications; vol. 45; 15; (2015); p. 1743 – 1750;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

119-39-1, Phthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

261.3 mg of acetic anhydride copper (II) and Molecular Sieve 4A (79.1 mg) were added to 80.7 mg of the resin obtained in Process 4. 400.0 mg of 1(2H)-phthalazinone and 984 mul of diisopropylethylamine in a solution of NMP (4 ml) were further added therein and stirred at 50C for 23 hours. After removing the reaction solution, the resin was washed with DMF, water, ethanol and DCM three times each and dried under reduced pressure.

119-39-1, The synthetic route of 119-39-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Ajinomoto Co., Inc.; EP1454898; (2004); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

253-52-1, Phthalazine is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol.

253-52-1, 253-52-1 Phthalazine 9207, aphthalazine compound, is more and more widely used in various fields.

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

253-52-1, Phthalazine is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A mixture of 2.80 g (16.0 mmol) of 1-bromo-3-fluorobenzene, 25 mL of THF and 0.49 g (19.0 mmol) of magnesium metal was stirred vigorously at room temperature for 5 min and then refluxed for 1.5 h to give a yellow solution. Heating was discontinued, and a solution of 2.00 g (15.0 mmol) of 2 in 8 mL of THF was added dropwise with stirring over a period of 10 min. The reaction was then refluxed for 1 h and carried forward as in Method A (65 ¡ãC, 1 h) to give 1.63 g (38percent) of 6l as a viscous, brown oil., 253-52-1

253-52-1 Phthalazine 9207, aphthalazine compound, is more and more widely used in various fields.

Reference£º
Article; Nammalwar, Baskar; Bunce, Richard A.; Berlin, K. Darrell; Bourne, Christina R.; Bourne, Philip C.; Barrow, Esther W.; Barrow, William W.; European Journal of Medicinal Chemistry; vol. 54; (2012); p. 387 – 396;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.119-39-1,Phthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

A solution of 2H-Phthalazin-l-one (1.01 g, 5 mmol) in phosphorus oxychloride (5 mL) was stirred at 130 0C for 1.5 h. The phosphorus oxychloride was removed under reduced pressure. The residue was partitioned between water (10 mL) and methylene chloride (50 mL). The methylene chloride phase was separated, dried over MgSO4, and evaporated to give a yellow solid (1.015 g, 90%).[00139] The above crude product (83 mg, 0.50 mmol), N-methyl-4-methoxy-aniline (69 mg, 0.50 mmol) and cesium carbonate (200 mg, 0.61 mmol) were stirred in anhydrous DMF (1 mL) in a sealed tube at rt for 17 h. The reaction was diluted with water (5 mL) and extracted with EtOAc (2×20 mL). The EtOAc solution was washed with water (5 mL), dried, and evaporated to give a brown residue. The crude product was purified by column chromatography (SiO2, EtO Ac:hexanes/15-50%) to give a light yellow solid (5 mg, 4%): 1H NMR (CDCl3) 9.11 (s, IH), 7.85 (m, IH), 7.66 (m, IH), 7.48-7.47 (m, 2H), 7.40-7.10 (m, 2H)5 6.87-6.81 (m, IH), 3.80 (s, 3H), 3.63 (s, 3H)., 119-39-1

119-39-1 Phthalazin-1(2H)-one 8394, aphthalazine compound, is more and more widely used in various fields.

Reference£º
Patent; MYRIAD GENETICS, INC.; CYTOVIA, INC.; WO2006/74223; (2006); A2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

253-52-1, Phthalazine is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(C) Phthalazine-5,8-dione precursors (Y1 and Y4=C, Y2 and Y3=N) used in the process of the present invention were prepared according to the following reaction scheme 4. The detailed procedure is described in (i) J. Med. Chem., 48, 744-752, and (ii) Bioorganic and Medical Chemistry Letters, 27, 2577-2580.

253-52-1, The synthetic route of 253-52-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Gerogetown University; Brown, Milton L.; Paige, Mikell; Torestsky, Jeffrey A.; Uren, Aykut; Kosturko, George; Bulut, Gullay; (58 pag.)US9522908; (2016); B2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

253-52-1, Phthalazine is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Phthalazine (1) (91 mg, 0.70 mmol), 1,1-dicyanoalkene 2(0.70 mmol), and isocyanide 3 (0.70 mmol) were dissolvedin acetonitrile (1 ml). After that, distilled water(0.05?0.1 ml) was added to the reaction mixture up tovisible turbidity and stirred at 25?30¡ãC for 12?18 h. Thereaction mixture was evaporated to dryness and product 4was purified by crystallization from ethanol.

253-52-1, 253-52-1 Phthalazine 9207, aphthalazine compound, is more and more widely used in various fields.

Reference£º
Article; Mironov, Maxim A.; Shulepov, Iliya D.; Kozhikhova, Ksenia V.; Ivantsova, Maria N.; Tokareva, Maria I.; Chemistry of Heterocyclic Compounds; vol. 53; 4; (2017); p. 430 – 433; Khim. Geterotsikl. Soedin.; vol. 53; 4; (2017); p. 430 – 433,4;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.253-52-1,Phthalazine,as a common compound, the synthetic route is as follows.

A. A solution of phthalazine (2.5 g, 19.2 mmol) in concentrated sulfuric acid (30 mL) is treated slowly with potassium nitrate (2 g, 19.2 mmol). After 18 h the solution is cooled. Water (30 mL) is added. The solution is basified using 10 M NaOH to pH 13 (litmus). The solution is cooled for 18 h, filtered to give 5-nitro-phthalazine (0.93 g).

253-52-1, As the paragraph descriping shows that 253-52-1 is playing an increasingly important role.

Reference£º
Patent; Calvo, Raul R.; Cheung, Wing S.; Player, Mark R.; US2006/116368; (2006); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

The phthalazine compound, cas is 119-39-1 name is Phthalazin-1(2H)-one, mainly used in chemical industry, its synthesis route is as follows.,119-39-1

[0322] General procedure: To a mixture ofphthalazone in anhydrous DMF (270mL), NaOEt (21% w/w solution in EtOH, 51 mL, 137 mmol) was added. After 15 min,propargyl bromide (80% solution in toluene, 14.8 mL, 20.4 g, 137 mmol) was added and thereaction mixture was stirred at r.t. for 2 days. After evaporation, the residue was stirred withhot H20 (3 L), cooled down and the product was filtered (51%).

As the rapid development of chemical substances, we look forward to future research findings about 119-39-1

Reference£º
Patent; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; FOKIN, Valery; SHARPLESS, Barray, K.; ECKMANN, Lars; MIYAMOTO, Yukiko; WO2014/205414; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

253-52-1, Phthalazine is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a stirred solution of furan (1.20 g,17.6 mmol) in dry THF (20 mL) was added dropwise n-butyllithium (2.5 M in hexanes, 7.30 mL,18.3 mmol) over a period of 30 min at ?78 ¡ãC. The solution was warmed to ?25 ¡ãC, and stirring wascontinued at this temperature for 30 min. The reaction mixture was cooled back to ?78 ¡ãC, and asolution of 1 (2.00 g, 15.3 mmol) in dry THF (20 mL) was added dropwise over 30 min. The reaction mixture was stirred at this temperature for 2 h. The mixture was poured into saturated NH4Cl(100 mL) and extracted with ethyl acetate (3 ¡Á 50 mL). The combined organic extracts were thenwashed with saturated NaCl (50 mL), dried (MgSO4), filtered, and concentrated under vacuum toafford 3f as a light brown oil. The crude product 3f was dissolved in DCM (30 mL), and triethylamine(2.37 g, 3.26 mL, 23.4 mmol) was added, followed by dropwise addition of acryloyl chloride (1.59 g,1.43 mL, 17.6 mmol) at 0 ¡ãC. The reaction mixture was stirred at 0 ¡ãC for 2 h. The reaction was thenquenched with saturated NaCl (25 mL), and the organic layer was separated. The aqueous layer wasextracted with DCM (2 ¡Á 30 mL), and the combined organic extracts were washed with saturated NaCl(50 mL), dried (MgSO4), filtered, and concentrated to afford the crude product. The product waspurified on a silica gel column eluted with hexanes?EtOAc (7:3) to afford 4f (2.66 g, 60percent) as a yellowliquid., 253-52-1

As the paragraph descriping shows that 253-52-1 is playing an increasingly important role.

Reference£º
Article; Nammalwar, Baskar; Muddala, N.Prasad; Bourne, Christina R.; Henry, Mary; Bourne, Philip C.; Bunce, Richard A.; Barrow, Esther W.; Berlin, K.Darrell; Barrow, William W.; Molecules; vol. 19; 3; (2014); p. 3231 – 3246;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem