Extracurricular laboratory: Synthetic route of 1242156-59-7

As the rapid development of chemical substances, we look forward to future research findings about 1242156-59-7

6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one, cas is 1242156-59-7, it is a common heterocyclic compound, the phthalazine compound, its synthesis route is as follows.,1242156-59-7

Under N2, acetic acid 2,6-dibromobenzyl ester (24.74 g, 80.3 mmol), 6-tert-butyl-8-fluoro-2H-phthazin-1-one (3.54 g, 16.1 mmol), Cs2CO3 (10.46 g, 32.1 mmol), CuI (4.61 g, 24.2 mmol) and N,N-dimethylethane-1,2-diamine (1.42 g, 16.1 mmol) were dissolved in DMF (70 mL). The reaction mixture was stirred at 150 C. for 4 h. The resulting mixture was cooled to room temperature and diluted with ethyl acetate (200 mL), and then 200 mL of water was added. The mixture was separated and the aqueous layer was extracted with ethyl acetate (200 mL¡Á2). The organic layers were combined and washed with water (200 mL) and brine (200 mL). The solution was dried over anhydrous sodium sulfate, filtered and concentrated. The resulting crude product was purified by silica gel chromatography (petroleum ether/ethyl acetate 4/1) to give 2-bromo-6-(6-tert-butyl-8-fluoro-1-oxo-1H-phthalazin-2-yl)-benzyl ester (3.21 g, 45%). 1H NMR (300 MHz, CDCl3): delta 8.17 (d, J=2.7 Hz, 1H), 7.71 (t, J=4.8 Hz, 1H), 7.50-7.45 (m, 2H), 7.36 (s, 1H), 7.34 (d, J=0.9 Hz, 1H), 5.17 (s, 2H), 1.94 (s, 3H), 1.42 (s, 9H). LC-MS calcd for C21H20BrFN2O3 (m/e) 446.06, obsd 447 and 449 [M+1]+.

As the rapid development of chemical substances, we look forward to future research findings about 1242156-59-7

Reference£º
Patent; Billedeau, Roland Joseph; Kondru, Rama K.; Lopez-Tapia, Francisco Javier; Lou, Yan; Owens, Timothy D.; Qian, Yimin; So, Sung-Sau; Thakkar, Kshitij C.; Wanner, Jutta; US2012/295885; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Extracurricular laboratory: Synthetic route of 75884-70-7

As the rapid development of chemical substances, we look forward to future research findings about 75884-70-7

6-Bromophthalazin-1(2H)-one, cas is 75884-70-7, it is a common heterocyclic compound, the phthalazine compound, its synthesis route is as follows.,75884-70-7

Step 3. 6-vinylphthalazine-1(2H)-one (BI27); A solution of 6-bromophthalazine-1(2H)-one (0.25 g, 1.11 mmol), potassium vinyl trifluoroborate (0.446 g, 3.33 mmol) and K2CO3 (0.46 g, 3.33 mmol) in DMSO (2 mL) was degassed with argon for 20 min at RT. PdCl2(dppf) (0.04 g, 0.055 mmol) was added at RT, and the reaction mixture was heated to 80 C. for 2 h. The reaction mixture was cooled to RT and filtered through celite bed under vacuum and washed with ethyl acetate. The reaction mixture was extracted with ethyl acetate and the combined ethyl acetate layer dried over Na2SO4 and concentrated under reduced pressure to afford the crude product. The crude compound was purified by column chromatography (SiO2, 100-200 mesh; 50% ethyl acetate/petroleum ether) to afford the title compound as a brown solid (0.12 g, 63%): 1H NMR (400 MHz, DMSO-d6) delta 13.61 (br, 1H), 8.33 (m, 1H), 8.19 (m, 1H), 8.01 (m, 2H), 6.97 (m, 1H), 6.15 (m, 1H), 5.56 (d, J=10.8 Hz, 1H); ESIMS m/z 172.93 ([M+H]+); IR (thin film) 1748, 1655, 3241 cm-1.

As the rapid development of chemical substances, we look forward to future research findings about 75884-70-7

Reference£º
Patent; Hunter, James E.; Lo, William C.; Watson, Gerald B.; Patny, Akshay; Gustafson, Gary D.; Pernich, Dan; Brewster, William K.; Camper, Debra L.; Lorsbach, Beth; Loso, Michael R.; Sparks, Thomas C.; Joshi, Hemant; Mandaleswaran, Adiraj; Sanam, Ramadevi; Gundla, Rambabu; Iyer, Pravin S.; US2012/329649; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Simple exploration of 75884-70-7

75884-70-7 6-Bromophthalazin-1(2H)-one 11535918, aphthalazine compound, is more and more widely used in various.

75884-70-7,75884-70-7, 6-Bromophthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of 6-bromophthalazine-1(2H)-one (0.25 g, 1.11 mmol), potassium vinyl trifluoroborate (0.446 g, 3.33 mmol) and [0441] K2CO3 (0.46 g, 3.33 mmol) in DMSO (2 mL) was degassed with argon for 20 min at ambient temperature. PdCl2(dppf) (0.04 g, 0.055 mmol) was added at ambient temperature, and the reaction mixture was heated to 80 C. for 2 h. The reaction mixture was cooled to ambient temperature and filtered through celite bed under vacuum and washed with ethyl acetate. The reaction mixture was extracted with ethyl acetate and the combined ethyl acetate layer dried over Na2SO4 and concentrated under reduced pressure to afford the crude product. The crude compound was purified by column chromatography (SiO2, 100-200 mesh; 50% ethyl acetate/petroleum ether) to afford the title compound as a brown solid (0.12 g, 63%): 1H NMR (400 MHz, DMSO-d6) delta 13.61 (br, 1H), 8.33 (m, 1H), 8.19 (m, 1H), 8.01 (m, 2H), 6.97 (m, 1H), 6.15 (m, 1H), 5.56 (d, J=10.8 Hz, 1H); ESIMS m/z 172.93 ([M+H]+); IR (thin film) 1748, 1655, 3241 cm-1.

75884-70-7 6-Bromophthalazin-1(2H)-one 11535918, aphthalazine compound, is more and more widely used in various.

Reference£º
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171308; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Some tips on 1242156-59-7

1242156-59-7 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one 59473765, aphthalazine compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1242156-59-7,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

To a suspension of NaH (60%, 473 mg, 1 1.8 mmol) in DMF (5 mL) was added a solution of 6- tert-butyl-8-fluoro-2H-phthalazin-l-one (which may be prepared as described in Berthel, S. et al. US 20100222325 Column 139; 1.3 g, 5.91 mmol) at 0 C. The mixture was stirred for 5 min at 0 C and heated at 70 C for 30 min under nitrogen. The mixture was cooled to room temperature, a solution of 4-bromo-l-bromomethyl-2-fluoro-benzene (1.74 g, 6.5 mmol) in DMF (3 mL) was added and the mixture was stirred for 1.5 h at room temperature. Cold water (5 mL) was added. The mixture was extracted with EtOAc and the organic extract was dried (Na2S04), and evaporated. The residue was purified by chromatography (silica gel, 20% EtOAc/hexane) to give 2-(4-bromo-2-fluoro-benzyl)-6-tert-butyl-8-fluoro-2H-phthalazin-l-one (1.0 g, 41%) as a yellow solid. MS calcd. for Ci9Hi8BrF2N20 [(M+H)+] 407, obsd. 407.2., 1242156-59-7

1242156-59-7 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one 59473765, aphthalazine compound, is more and more widely used in various.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; DOMINIQUE, Romyr; LOPEZ-TAPIA, Francisco Javier; MERTZ, Eric; SO, Sung-Sau; WO2014/76104; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Brief introduction of 1242156-59-7

The synthetic route of 1242156-59-7 has been constantly updated, and we look forward to future research findings.

1242156-59-7, 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 2: 1-(3-Bromo-2-formylphenyl)-3-(4-(morpholine-4-carbonyl)phenylamino)-1H-pyrazole-4-carbonitrile (34 mg, 0.0708 mmol), 6-tert-butyl-8-fluorophthalazin-1(2H)-one (31.2 mg, 0.142 mmol), cuprous iodide (27 mg, 0.142 mmol) and sodium bicarbonate (14.9 mg, 0.177 mmol) were combined in 1 mL of DMSO. The solution was degassed with argon and then heated in a microwave at 120 C. for 1 hr. The resulting mixture was extracted with ethyl acetate and ammonium chloride solution. The organic layer was concentrated and purified by flash column chromatography using ethyl acetate (containing 5% methanol) in hexanes (5% to 80% linear gradient in 15 minutes, 12 g silica gel) to give the pure desired product. This material was triturated with ether in hexanes and filtered to give 1-[3-(6-tert-butyl-8-fluoro-1-oxo-1H-phthalazin-2-yl)-phenyl]-3-[4-(morpholine-4-carbonyl)-phenylamino]-1H-pyrazole-4-carbonitrile (18.2 mg, 41.5% yield) as a pale pink solid. LC/MS clacd for C33H30FN7O3 (m/e) 591.24, obsd 592.0 (M+H, ES+); 1H NMR (400 MHz, DMSO-d6) delta ppm 1.38 (s, 9H), 3.50 (br., 4H), 3.59 (br., 4H), 7.37 (d, J=8.6 Hz, 2H), 7.59 (d, J=8.3 Hz, 1H), 7.65-7.71 (m, 3H), 7.78 (d, J=13.1 Hz, 1H), 7.87-7.93 (m, 2H), 8.08 (s, 1H), 8.58 (d, J=2.3 Hz, 1H), 9.29 (s, 1H), 9.47 (s, 1H)., 1242156-59-7

The synthetic route of 1242156-59-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Billedeau, Roland Joseph; Kondru, Rama K.; Lopez-Tapia, Francisco Javier; Lou, Yan; Owens, Timothy D.; Qian, Yimin; So, Sung-Sau; Thakkar, Kshitij C.; Wanner, Jutta; US2012/295885; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Analyzing the synthesis route of 1242156-59-7

The synthetic route of 1242156-59-7 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1242156-59-7,6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one,as a common compound, the synthetic route is as follows.

Step 5. Preparation of 2-(6-tert-butyl-8-fluoro-l-oxo-lH-phthalazin-2-yl)-4-iodo-pyridine-3- carbaldehyde Method A In a 1 L round-bottomed flask, 6-tert-butyl-8-fluorophthalazin-l(2H)-one (5.6 g, 25.4 mmol) was combined with THF (300 ml) to give a colorless solution. Sodium hydride (1.12 g, 28.0 mmol) was added. The reaction mixture was stirred at ambient temperature for 10 min. 2-Fluoro-4- iodonicotinaldehyde (7.02 g, 28.0 mmol) was added and the reaction mixture was stirred at ambient temperature for 1 h. The reaction was complete as determined by LCMS analysis. The reaction mixture was quenched with saturated NH4CI. The reaction mixture was poured into 200 mL of H20 and extracted thrice with CH2CI2. The organic layers were washed with brine, then dried over Na2S04 and concentrated under vacuum. The resultant bright yellow solid was transferred into a filter funnel and the flask washed twice with a small volume of EtOAc to ensure complete transfer of the solid into the funnel. The liquid was filtered through. The solid was triturated twice with Et20 and dried under vacuum to afford the desired product as a cream- colored solid (8.09 g, 17.9 mmol, 70.5 % yield). (M+H)+ = 452 m/e. *H NMR (400 MHz, CUC -d) delta ppm 1.44 (s, 9 H) 7.49 – 7.54 (m, 1 H) 7.54 (d, 7=1.77 Hz, 1 H) 8.03 (d, 7=5.31 Hz, 1 H) 8.30 (d, 7=2.53 Hz, 1 H) 8.37 (d, 7=5.31 Hz, 1 H) 9.98 (s, 1 H)., 1242156-59-7

The synthetic route of 1242156-59-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; IYER, Raman Mahadevan; LAINE, Dramane Ibrahim; LOPEZ-TAPIA, Francisco Javier; PHILLIPS, Jonathan E.; STEVENSON, Christopher; WO2014/83026; (2014); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Downstream synthetic route of 1242156-59-7

As the paragraph descriping shows that 1242156-59-7 is playing an increasingly important role.

1242156-59-7, 6-(tert-Butyl)-8-fluorophthalazin-1(2H)-one is a phthalazine compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1-(2-Formyl-3-iodophenyl)-3-(4-(morpholine-4-carbonyl)phenylamino)-1H-pyrazole-4-carbonitrile (115 mg, 0.218 mmol), 6-tert-butyl-8-fluorophthalazin-1(2H)-one (48 mg, 0.218 mmol), cuprous iodide (41.5 mg, 0.218 mmol) and sodium bicarbonate (36.6 mg, 0.436 mmol) were combined in 2 mL of DMSO. The mixture was thoroughly degassed with argon and stirred in an oil bath preheated to 100 C. for 1 hr. The mixture was extracted with dichloromethane and water. The organic layer was washed with brine, dried over sodium sulfate and filtered. Solvents were evaporated and the residue was purified by flash column chromatography using methanol in dichloromethane (0% to 5% in 16 minutes, 24 g silica gel) to give 1-[3-(6-tert-butyl-8-fluoro-1-oxo-1H-phthalazin-2-yl)-2-formyl-phenyl]-3-[4-(morpholine-4-carbonyl)-phenylamino]-1H-pyrazole-4-carbonitrile as a pale pink solid (54 mg, 40% yield). LC/MS clacd for C34H30FN7O4 (m/e) 619.23, obsd 620.0 (M+H, ES+); 1H NMR (400 MHz, CDCl3) delta ppm 1.43 (s, 9H), 3.56-3.76 (m, 8H), 6.61 br. s., 1H), 7.40 (d, J=8.6 Hz, 2H), 7.46 (d, J=8.6 Hz, 2H), 7.52 (dd, J=12.4, 1.8 Hz, 1H), 7.55-7.59 (m, 2H), 7.64 (d, J=7.8 Hz, 1H), 7.78 (t, J=8.1 Hz, 1H), 8.16 (s, 1H), 8.32 (s, 1H), 9.97 (s, 1H)., 1242156-59-7

As the paragraph descriping shows that 1242156-59-7 is playing an increasingly important role.

Reference£º
Patent; Billedeau, Roland Joseph; Kondru, Rama K.; Lopez-Tapia, Francisco Javier; Lou, Yan; Owens, Timothy D.; Qian, Yimin; So, Sung-Sau; Thakkar, Kshitij C.; Wanner, Jutta; US2012/295885; (2012); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Application of (1,3-Bis(2,4,6-trimethylphenyl)-2-imidazolidinylidene)dichloro(phenylmethylene)(tricyclohexylphosphine)ruthenium

As the rapid development of chemical substances, we look forward to future research findings about 76240-49-8

The phthalazine compound, name is 6-Bromophthalazine-1,4-diol,cas is 76240-49-8, mainly used in chemical industry, its synthesis route is as follows.,76240-49-8

6-Bromo-2,3-dihydrophthalazine-1 ,4-dione (25. g, 0.10 mol) was added to a mixture of phosphorus oxychloride (100. mL, 1 .06 mol) and thionyl chloride (100. mL, 1 .37 mol) under nitrogen, cooled to 0 C. Once the initial exotherm had subsided the reaction mixture was allowed to warm to ambient temperature and then heated at 100 C for 4 h. The mixture was then cooled to ambient temperature and then concentrated in vacuo. The residue was dissolved in iPrOAc (350 mL) and washed with saturated sodium bicarbonate solution (added until effervescence stopped), a precipitate formed, the two layers were filtered to isolate the first crop of the intermediate. The organic layer was collected and distilled to dryness to give the second crop of the intermediate. The solids were combined and partitioned between 1 ,4-dioxane (200 mL) and 2 N NaOH (100 mL). The resulting mixture was heated at 40 C overnight and then cooled to ambient temperature and left to stand. The solid precipitate was filtered (first crop of product) and the resulting solution partitioned between EtOAc (250 mL) and water (200 mL). Further precipitate formed which was filtered and combined with the first crop of the product, the organic phase was separated and evaporated to dryness to give the second crop of the product. Product isolated is a mixture of two regioisomers, 7-bromo-4-chloro-2H-phthalazin-1 -one and 6- bromo-4-chloro-2H-phthalazin-1 -one, total yield isolated (17.6 g, 68.0 mmol, 66%).1 H NMR (300MHz, DMSO-d6) delta = 13.02 (s, 1 H), 12.98 (s, 1 H), 8.36 (d, J = 2.1 Hz, 1 H), 8.22 (dd, J = 2.1 , 8.6 Hz, 1 H), 8.17 – 8.1 1 (m, 3H), 7.93 (d, J = 8.7 Hz, 1 H). 1 :1 mixture of the two regioisomers.A stirred solution of 7-bromo-4-chloro-2H-phthalazin-1 -one and 6-bromo-4- chloro-2H-phthalazin-1 -one (8.82 g, 33.99 mmol) (-1 :1 mixture of isomers), tris(dibenzylideneacetone)dipalladium(0) (1 .56 g, 1 .7 mmol) and Xantphos (1 .97 g, 3.4 mmol) in 1 ,4-dioxane (200 mL) was degassed with nitrogen. N,N-Diisopropylethylamine (12.1 mL, 68.0 mmol) and benzyl mercaptan (7.98 mL, 68.0 mmol) were then added sequentially to the flask, and the resulting mixture was heated at 60 C for 18 h.The two flasks were combined and distilled to dryness, the residue was suspended in DCM (200 mL). The mixture was agitated for 30 min and filtered to give the desired product as a -1 :1 mixture of regioisomers 7-benzylsulfanyl-4-chloro-2H-phthalazin- 1 -one and 6-benzylsulfanyl-4-chloro-2H-phthalazin-1 -one. The mixture of isomers was recrystallised with acetic acid (200 mL), with a hot filtration to remove inorganic impurities. The resulting crystalline solid was filtered, washed with AcOH and minimal amount of ether, yielding a white solid which was dried in the vacuum oven at 40 C, 7-benzylsulfanyl-4- chloro-2H-phthalazin-1 -one (5.35 g, 17.7 mmol, 26%). 1H NMR (300MHz, DMSO-d6) delta = 12.86 (s, 1 H), 8.07 (d, J = 2.1 Hz, 1 H), 7.95 (dd, J = 2.1 , 8.6 Hz, 1 H), 7.87 (d, J = 8.6 Hz, 1 H), 7.49 – 7.44 (m, 2H), 7.37 – 7.24 (m, 3H), 4.49 (s, 2H)

As the rapid development of chemical substances, we look forward to future research findings about 76240-49-8

Reference£º
Patent; CANCER RESEARCH TECHNOLOGY LIMITED; MCGONAGLE, Alison E.; JORDAN, Allan; WASZKOWYCZ, Bohdan; HUTTON, Colin; WADDELL, Ian; HITCHIN, James R.; SMITH, Kate Mary; HAMILTON, Niall M.; (497 pag.)WO2016/92326; (2016); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Application of 3,4-Dichloroisothiazole-5-carboxylic acid

As the rapid development of chemical substances, we look forward to future research findings about 1021298-68-9

A common heterocyclic compound, the phthalazine compound, name is 2-Fluoro-5-((4-oxo-3,4-dihydrophthalazin-1-yl)methyl)benzonitrile,cas is 1021298-68-9, mainly used in chemical industry, its synthesis route is as follows.,1021298-68-9

Add Compound III 25.82 g to the reaction flask.Purified water 100ml,Stir at room temperature,Then add 22.4M sodium hydroxide 92.4ml,The mixture temperature was heated to 100 C,Stir 12h, cool to room temperature, filter, wash,The combined filtrate was acidified with 46.2 ml of 2M diluted hydrochloric acid for 30 min,Then, 500 ml of methanol, 18.70 g of triethylamine, and 14.25 g of 1-cyclopropanecarbonylpiperazine are added successively.At a reaction temperature of 20-25C, the reaction is stirred for 10 hours. After the reaction is completed, it is cooled to 0C and filtered.38.66 g of solids were obtained with a yield of 96.2% and a purity of 99.89%. The refining of olaparib (I)30g of crude oleapani was placed in a dissolving tank81.82 ml of isopropanol and 818.2 ml of acetone were added and the temperature was controlled at 45-50C.Stir and dissolve. After the crude product is completely dissolved, add charcoal to decolorize it for 30 minutes.The decolorization reaction was followed by hot filtration and the filtrate was stirred at room temperature for crystallization.Then cool down to 0 ~ 10 C for 4 hours, filter, and wash with acetone,Filtration, drying, that is, olaparib 28.35g,The yield was 94.5%, the purity was 99.99%, the mononuclear 0.05%, and the total heterologous 0.11%.

As the rapid development of chemical substances, we look forward to future research findings about 1021298-68-9

Reference£º
Patent; Shandong Yuxin Pharmaceutical Co., Ltd.; Liu Zhenteng; Chen Yu; Sun Heng; Wang Chunyan; (6 pag.)CN108101852; (2018); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem