M.W:300-400 | Page 54 of 58 | Heterocyclic Building Blocks-phthalazine

Share a compound : 763111-47-3

The chemical industry reduces the impact on the environment during synthesis,763111-47-3,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one,I believe this compound will play a more active role in future production and life.

763111-47-3, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, cas is 763111-47-3,the phthalazine compound, it is a common compound, a new synthetic route is introduced below.

An appriopriate aldehyde (0.2 mmol) and 4- [4-FLUORO-3- (PIPERAZINE-L- carbonyl) BENZYL]-2H-PHTHALAZIN-1-ONE (2) (0.24 mmol) were dissolved in dichloromethane (2 ml). Sodium triacetoxyborohydride (0.28 mmol) and glacial acetic acid (6.0 mmol) were then added and stirred at room temperature for 16 hours. The reaction mixtures were then purified by preparative HPLC.

Reference£º
Patent; KUDOS PHARMACEUTICALS LIMITED; MAYBRIDGE LIMITED; WO2004/80976; (2004); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

The important role of 763111-47-3

763111-47-3, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,763111-47-3 ,4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, other downstream synthetic routes, hurry up and to see

Name is 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, as a common heterocyclic compound, it belongs to phthalazine compound, and cas is 763111-47-3, its synthesis route is as follows.

General procedure: Intermediates 8 (1 eq) and respective 9-chloroacridine derivatives 4a-4f (1.1 eq) were added to a round flask, and then excessphenol was added as solvent. The reaction system was warmed up to 60 C until phenol was melted and stirred for 0.5 h under argonprotection. Then the mixture was warmed up to 120 C and continued to reaction for more 2 h. After the reaction was completed, themixture was added to ethyl ether drop by drop [2]. The precipitate was filtered and washed twice with new ethyl ether to give pureproducts 9a-9f, which were then characterized by 1H NMR, 13C NMR, melting point and high resolution mass spectrum (HRMS, ESI).

Reference£º
Article; Dai, Qiuzi; Chen, Jiwei; Gao, Chunmei; Sun, Qinsheng; Yuan, Zigao; Jiang, Yuyang; Chinese Chemical Letters; vol. 31; 2; (2020); p. 404 – 408;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Some tips on 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one

As a common heterocyclic compound, it belongs to phthalazine compound, name is 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, and cas is 763111-47-3, its synthesis route is as follows.

4-(4-Fluoro-3-(piperazin-1-yl-carbonyl)-benzyl)pyridazine-1(2H)one (5) (0.78 g, 2.13 mmol) was added to a 25 ml three-necked flask.Dichloromethane (6.5 ml) and triethylamine (0.52 g, 5.14 mmol) were added, and the mixture was stirred and cooled to 1-10 C.Propionyl chloride (236 mg, 2.56 mmol) was added dropwise, and the mixture was warmed to room temperature and stirred for 1 h.TLC showed the reaction was complete; the reaction mixture was directly concentrated to dryness, and the residue was mixed with water and then stirred for 1 hour and then filtered.Obtained as an off-white solid.The yield was 50%.

Reference£º
Patent; Shanghai Bobang Pharmaceutical Technology Co., Ltd.; Gao Heyong; Liu Zhende; Zhang Wensheng; (28 pag.)CN108383798; (2018); A;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Introduction of a new synthetic route about 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one

EXAMPLE A.4. Compound c-3 (127l): 4-(4-fluoro-3-(4-(2-(3-iodophenyl)acetyl)piperazine-l-carbonyl)- benzyl)phthalazin-l(2H)-one. A solution of 3-iodophenyl acetic acid (6.5 mg, 0.048 mmol), l-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) (10.5 mg, 0.055 mmol), N-hydroxy succinimide (NHS) and 600 mu DM F was stirred for 30 min at room temperature. Then, 4-(4-fluoro-3-(piperazine-l-carbonyl)benzyl)- phthalazin-l(2H)-one (10 mg, 0.0275 mmol) was added to the solution and the mixture was stirred at room temperature overnight. The reaction was washed with 500 mu of H20 and extracted with 500 mu dichloromethane (DCM). The resulting organic solution was purified on silica gel, using a gradient elution from neat DCM to DCM/hexane 5:1 to obtain the desired product as a white solid (3 mg, 20% yield). 1H NMR (CDCI3) delta = 9,82 (s, 1H), 8.40-8.38 (m, 1H), 7.71-7.69 (m, 2H), 7.55-7.53 (m, 1H), 7.51-7.50 (m, 2H), 7.25-7.24 (m, 2H), 7.09-6.90 (m, 3H), 4.20 (s, 2H), 3.64-3.31 (m, 8H), 2.84 (s, 2H). LC-ESI-MS (+) m/z = 633.1 [M+Na+]+. HRMS-ESI [M+H+]+ m/z calculated for [C28H24FIN403]+ 611.0955, found 611.0948.

Reference£º
Patent; MEMORIAL SLOAN KETTERING CANCER CENTER; REINER, Thomas; LEWIS, Jason S.; WEBER, Wolfgang; RODRIGUEZ, Beatriz Salinas; CARNEY, Brandon; CARLUCCI, Giuseppe; (89 pag.)WO2016/33293; (2016); A1;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem

Share a compound : 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one, 763111-47-3

Downstream synthetic route of 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one

EXAMPLE A.6. Compound c-5 (127l): 4-(4-fluoro-3-(4-(3-(3-iodophenyl)propanoyl)piperazine-1-carbonyl)benzyl)phthalazin-l(2H)-one. A solution of 4-(4-fluoro-3-(piperazine-l-carbonyl)benzyl)phthalazin-l(2H)-one (10 mg, 0.0275 mmol), HBTU (16 mg, 0.0413 mmol) triethylamine (40 mu, 0.3 mmol) and 3-(3-iodophenyl)propionic acid (7.6 mg, 0.0275 mmol) in 400 mu of acetonitrile was stirred overnight at room temperature. The crude product was then purified by preparative HPLC and the isolated product dried at vacuum to obtain a white solid (5.1 mg, 38%). 1H NMR (CDCI3) delta = 10.33 (s, 1H), 8.41-8.39 (d, 1H), 7.71-7.63 (m, 3H), 7.51-7.45 (m, 2H), 7.27-7.25 (m, 2H), 7.12-6.92 (m, 3H), 4.22 (s, 2H), 3.65-3.12 (m, 8H), 2.88- 2.83 (m, 2H), 2.59-2.48 (m, 2H). LC-ESI-MS (+) m/z = 647.1 [M+Na+]+. HRMS-ESI [M+H+]+ m/z calculated for [C29H26FIN403 625.1112, found 625.1111.

New learning discoveries about 763111-47-3

A QMA cartridge containing cyclotron -produced [18F] fluoride ion was euted with a solution containing 9 mg Kryptofix [2.2,2] (4,7.13, 16,21,24- hexaoxa- l,10-diaza bicycloi8.8.8]hexacosane), 0.08 m L 0.15 M K2C03 and 1.92 m L MeCN into a 5 m L reaction vial. Water was removed azeotropically at 120 C. 500 mug of ethyl 4-nitrobenzoate dissolved in 100 mu of DMSO was then added to the reaction vial and heated to 150 C for 15 minutes. The reaction via l was then allowed to cool as 50 mu of 1M NaOH was added. The reaction mixture was stirred for 1 min and 50 mu of 1M HCI was added to quench. Then, 2 mg of 4-(4-fiuoro-3-(piperazine-l-carbonyl)benzyi)phthaiazin- l(2H)-one dissolved in 100 mu of DMSO was added , followed by 10 mg of HBT U dissolved in 100 mu of DMSO and 20 mu. of Et3N. The reaction mixture was stirred for 1 minute. 400 mu MeCN followed by 700 mu H20 was then added and the solution was injected onto a C6-Pheny analytical HPLC column and eluted under isocratic conditions (Method B: 30% acetonitrile in water for 35min). Compound C- 2f eluted at (tR = 25.5 min), which was well resolved from the nitro analogue (4-(4-fluoro-3-(4-(4- nitrobenzoyl)piperazine-l-carbonyl)benzyl)phthalazin-l(2H)-one; tR = 30.1 min). For intravenous administration, the product-containing fraction was passed through a CIS light-SepPak cartridge preconditioned with EtOH (10 m L) and water (10 mL). The cartridge was washed with water (3 m L) and C-2f was eluted using EtOH (400 mu). The solution was then diluted with 0.9% saline to 10% EtOH. The radiochemical purity of the final formulation was confirmed using analytical HPLC.

Application of Cinnoline-4-carboxylic acid

To 20 mg (54.5 muiotaetaomicronIota) of 4-(4-fluoro-3-(piperazine-l-carbonyl)benzyl)phthalazin-l(2H)-one dissolved in 1 mL of MeCN, 9.2 mg (65.5 muiotaetaomicronIota) 4-fluorobenzoic acid was added followed by 24.8 mg (65.5 muiotaetaomicronIota) of HBTU and 18 mu (131 muiotaetaomicronIota) of Et3N. The reaction mixture was stirred for 5 minutes and purified by H PLC to yield the compound as an orange solid (11.5 mg, 23.5 muiotaetaomicronIota, 43%). 1H-NM R (500 M Hz, CDC delta = 10.74 (s, 1H), 8.51-8.49 (d, 1H), 7.83-7.76 (m, 2H), 7.82 (s, 1H), 7.45-7.44 (m, 2H), 7.38-7.36 (m, 2H), 7.14-7.08 (m, 3H), 4.33 (s, 2H), 3.75-3.39 (m, 8H). MS-ES m/z [M + Na]+ = 511.2. H RMS-ESi m/z calculated for [C27 H22 N4 03 F2 Naf 511.1558, found 511.1569 [M + Na]+.

Downstream synthetic route of 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one

The important role of 4-(4-Fluoro-3-(piperazine-1-carbonyl)benzyl)phthalazin-1(2H)-one

(c) 4-[3-(4-Cyclopropanecarbonyl-piperazine-1-carbonyl)-4-fluoro-benzyl]-2H-phthalazin-1-one (A)To a stirred suspension of compound B (1290 g) in CH2CI2 (15480 ml) under nitrogen was added a pre-mixed solution of triethylamine (470 ml) and cyclopropane carbonyl chloride (306 ml) in CH2CI2 (1290 ml) dropwise with the temperature kept below 2O0C. The solution was then stirred at 10-15C for 15 minutes and sampled for completion. The reaction mixture was found to contain only 1.18% of starting material B and so the reaction was deemed complete and the batch was then worked-up.The reaction mixture was washed with water (7595 ml), 5% citric acid solution (7595 ml), 5% sodium carbonate solution (7595 ml) and water (7595 ml). The organic layer was then dried over magnesium sulfate (50Og).The CH2CI2 containing product layer was then isolated, filtered through Celite and charged to a 25I vessel. CH2CI2 (8445 ml) was then distilled out at atmospheric pressure and ethanol (10000 ml) added. Distillation was then continued with every 4000 ml of distillate that was removed being replaced with ethanol (4000 ml) until the head temperature reached 73.70C. The reaction volume was then reduced (to 7730 ml) by which time the head temperature had reached 78.90C and the solution was allowed to cool to 8C overnight. The solid was then filtered off, washed with ethanol (1290 ml) and dried at 700C overnight.Yield = 1377.3 g (90%). HPLC purity (99.34% [area %]). Contained 4.93% ethanol and 0.45% CH2CI2 by GC.

Reference£º
Patent; KUDOS PHARMACEUTICALS LIMITED; WO2008/47082; (2008); A2;,
Phthalazine – Wikipedia
Phthalazine | C8H6N2 – PubChem